MAGAZINE TUBE DENT RAISER Reviews & Ratings

Slides into 12- or 20-gauge magazine tubes to quickly remove dents. Grooved to clear “tabs” on 1100 Special Field and 11-87 with new-style magazine spring retainer. Please note, this product will not work on Mossberg magazine tubes.

12 Gauge Magazine Tube Dent Raiser dimensions: 8-3/4” (22.2cm) long x 0.920” (23.4mm), 11” (27.9cm) handle

20 Gauge Magazine Tube Dent Raiser dimensions: 8-3/4” (22.2cm) long x 0.785” (19.9mm), 11” (27.9cm) handle

View Product

Write a review

Reviews Summary

The MAGAZINE TUBE DENT RAISER is a high-quality tool praised for its effectiveness in removing dents from shotgun magazine tubes, especially on models like the Remington 870. Users appreciate its solid construction and performance but note that it can be challenging to use and costly. While many found it effective, some experienced difficulty with compatibility, getting stuck, or needing additional work afterward.

What Reviewers Are Saying

Effectiveness

60%

Many users confirm that the tool effectively removes dents and dimples, especially for specific models like the Remington 870. While some experienced challenges, the majority found it helpful in achieving their desired results, making it a recommended choice for dent removal.

Build Quality

70%

Reviewers frequently highlight the tool's solid steel construction and weight, indicating it feels durable and well-made. This aspect contributes to the confidence users have in the tool lasting for years of use, with many satisfied with its overall quality.

Difficulty of Use

55%

A significant number of reviews mention challenges while using the tool, including getting it stuck in the magazine tube and requiring heavier strikes with a hammer than anticipated. Some users had to perform additional filing and modifications after initial use, which detracted from their experiences.

Cost Concerns

50%

Several customers express that the tool is overpriced considering its function and the ease of potential fabrication. Some suggest the manufacturer should offer a rental option or buy-back for users who may only need it temporarily, indicating a desire for more cost-effective solutions.

Compatibility Issues

45%

Reviewers pointed out compatibility challenges with certain shotgun models, noting that the tool may not work effectively on all types. Some had issues with models like Turkish shotguns and noted that using it on specific tubes could lead to damage, signaling a need for better usage guidelines.

Need for Instruction Improvement

40%

A few users suggested that Brownells should provide clearer and more detailed instructions, especially considering the varied results experienced. Many found the instructional videos misleading, indicating that better guidance could enhance user success and prevent frustrations.

Sort by Filter by rating

I watched some video's of this in use, and none of them showed the down side. The tool is well made and the grooves on the side of the tool make it a breeze to remove. I had to go through the process three or four time to raised the magazine tube indent to the point of allowing a shell to pass without catching. It was recommended to purchase a new follower, I couldn't raise the dents enough to let the new follower work, the magazine extension came with a new spring and plastic flower, I had to sand down the plastic follower, (diameter) to allow it to work smoothly. Then when reinstalling the barrel, the magazine tube was deformed just enough to have to bang on the barrel to get it past the old indent. In the end, I'm happy with the way it turned out, but the video's out there are misleading to the ease in which the process is explained. I would still recommend this tool over the alternative swag tool out there.

Would you recommend this? Yes, I would recommend to a friend

by Paul E. on April 21, 2025

Verified Purchase

Was this review helpful? 0

Still more work required

Some additional work required. Grinding, buffing etc.

by John B. on November 12, 2023

Verified Purchase

Was this review helpful? 0

Does not fit Tristar Mag 3.5" mag tube.

Seems well built. Doesnt work on Turkish gun. Currently stuck on a Tristar 3.5" Mag shotgun mag tube. Dent not removed, tool stuck half way in. Greased up and stuck.

Not recommended for removing dimples

Brownells has a video on youtube (probably also on the Tech Videos section of brownells.com) saying you can use it to flatten out the dimples on 870 Express magazine tubes if you want to install a magazine extension. I do *not* recommend this method. I used that dent removal tool on my 870 Express and then came the problems ... I ended up with an oversized magazine tube, making it difficult to put the barrel back. Of course the two dents where still deep enough to cause the follower to stick ... I ended up drilling out and sanding both "dimples"... I think that tool would probably work great as a dent removal tool (hence the name !) but I think Brownells Tech video telling you it can be used to remove the two dimples on 870 Express magazines is misleading. That tool should be used only as a dent removal tool and should *not* be used to try and remove the dimples from 870 Express magazine tubes. Fits Remington 870 tubes. I also have a Baikal MP-153 (sold as the Remington SPR-453 in the US) and the tool doesn't fit. The magazine tube on the MP-153/SPR-453 is tighter. I'm also going to send an email to Remington about those useless dimples on the factory magazine tube !