IRON SIGHT SLIDE FOR GLOCK® 17 GEN 3 Reviews & Ratings

IRON SIGHT SLIDE FOR GLOCK 17

Our Iron Sight Slide for Glock®17® Gen3 enables you to build a custom Glock®-style pistol - or rebuild an old one - with a slide that sports distinctive customized cocking serrations. The unique front serrations aid in manipulating the slide under stress, especially for quick chamber checks AND for clearing the occasional jam. Both the front and rear serrations are cut to the same depth as the Glock® factory slide serrations to ensure no loss in overall slide rigidity. The top edges and the front around the muzzle area are chamfered to reduce the risk of snagging on clothing and to make holstering the pistol easier. Like all Brownells slides, the Iron Sight model for Gen3 Glock® 17 is precision machined from solid 17-4 stainless steel billet to factory specifications inside so it is compatible with any factory or aftermarket Gen3 internal components. Outside, there's a Glock® factory rear sight dovetail and front sight tenon cut ready for any factory or aftermarket sights you choose. This is the perfect companion "top-half" for a custom pistol built on a Polymer80 80% frame.

Accepts Gen3 Glock® 17 internal parts
Sturdy machined 17-4 stainless steel
Tough matte Black Nitride finish
Factory cuts for iron sights
Channel liner not included; please order separately (see note below)
Window model available

You can get your Brownells Iron Sight Slide for Gen3 Glock® 17 with a solid top and distinctive wraparound front cocking serrations - swipe your paw along the front of the slide and you can't avoid racking it. The Iron Sight slide is also available with a window cutout on top between the front side serrations. The window aids in heat dissipation to keep the barrel cool during extended fire, AND if you have an upgraded barrel with a contrasting finish or a unique exterior pattern (fluting, spirals, "flames," etc.) it'll help your gun stand out from the matte black sameness on the firing line!

Brownells Gun Tech™ Note: Channel liner required for these slides. Channel liner is a press fit and requires a tool to install. We recommend #777-100-017.

View Product

Write a review

3 Stars

Reviews Summary

The IRON SIGHT SLIDE FOR GLOCK® 17 GEN 3 impresses users with its high-quality build, smooth operation, and great fit, especially for Polymer80 builds. Many appreciate the aesthetic details like front serrations and window cutouts. However, some encountered fitting issues, particularly with the extractor and front sight screw, suggesting minor adjustments may be needed for optimal performance.

What Reviewers Are Saying

Product Quality

80%

The overall quality of the IRON SIGHT SLIDE is highly praised in the reviews. Customers note the use of high-quality steel, perfect machining, and attractive finishes, contributing to a positive perception of the product. Many feel it meets or exceeds expectations for both aesthetics and function.

Fit and Compatibility

60%

Several reviews address fitting issues, particularly with Polymer80 frames and extractor components. While the majority found the slides fit well, some had to make adjustments or address minor burrs to ensure proper function. This indicates a need for potential fitting depending on the specific frame or components used.

Aesthetic Features

55%

Many users enjoy the aesthetic features such as the front and rear serrations and window cutouts that add to both appearance and functionality. These features are frequently highlighted as adding value to the slide while making it visually appealing when paired with aftermarket barrels.

Value for Money

75%

Numerous reviewers mention the slide's affordability, particularly in comparison to other aftermarket options. Many find it provides excellent value, given the quality, fit, and finish, suggesting it is a smart choice for budget-conscious buyers looking for reliable performance.

Customer Satisfaction

70%

Overall satisfaction among reviewers is high, with many expressing intent to repurchase and recommending the slide to others. Positive experiences highlight reliable performance during use and ease of assembly. However, a few minor quality control issues were noted, which could affect customer confidence.

Sort by Filter by rating

Good Value, fitting required

Slide rubs on both factory barrel and Lone Wolf match grade barrel. Need fitting or use reduced power recoil spring with the glock factory frame to cycle properly. Otherwise, good price, good finish, Everything else function properly.

G17 slide with window

I have used this slide on a g19 and bought 2 for the g17. I really like the window it's nice when you have an aftermarket fluted barrel to show it off a little. The only problem I had was one of the g17 slides had a small burr on the top side of the extractor cutout right at the end on the inner lip. It cause the extractor to bind up and get stuck. A few passes with a fine flat file cleaned it up in just about a minute as i was being careful to not remove any extra material only the burr and now it works just as great as my other ones. 1 minor flaw that was easily remedied it must have slipped through the qc check but nothing to be mad about. Would definitely buy again.

17 Slide Brownells

Just wanted to give an opinion so the rating doesn't really mean a lot. Looking at this slide I was thinking about finishing a Poly 80 with aftermarket slide but I just can't make myself like the grooves on the top of the slide at the muzzle end. This would be so much better with the slide only cut on the side surfaces. IMO.

great slide at a great price

Looks good works well. Needed to order a channel sleeve. My unit did not come with one. Had a little trouble installing the channel sleeve... very tight.. Cleaned channel with some alcohol and buffed sleeve slightly with some fine sandpaper .. Installed easily with Brownells tool . Installed all new internal parts throughout .. Tested with Glock, Lone wolf ,,P80 ver1 and ver 2, frames .. all check out ok..Recommended buy. Suggest bow tie slide racker for cool look.

Pretty Happy

This slide looks awesome! For the price you absolutely cant beat it. I only have one issue with it which is the extractor plunger hole is way too tight. I read some other reviews and saw a couple people had the same issue but it sounds like a little sandpaper will fix that. Otherwise Im very impressed. The serrations are deep and pretty sharp. Definitely sharper than on the OEM slides but its not an issue. I really like the top cut as well.

Brownell's Glock 17 Slide

I purchased this slide to top off a Polymer80 lower build. The fit and finish of the slide is excellent. The slide takes all of the original slide internals and the stock Glock night sights fit like a glove. The front and rear serrations provide for a secure way to manipulate the slide with no slipping of the hand when hot, cold, wet or dry,. I have only one slight problem with the slide. When attaching the Glock front sight, the relief machined for the front sight screw was not enough to snug the screw down properly using a standard or even with a thin walled driver. I sent Brownell's a picture and recommended they cut a little more radius. I am pleased with my choice of slide and will be making another purchase for my Glock 19