GOV'T LENGTH 1911 RECOIL SPRING TESTER Reviews & Ratings
Reviews Summary
Customers express mixed feelings about the GOV'T LENGTH 1911 RECOIL SPRING TESTER. While some found it easy to use and accurate for government-length springs, others faced issues with inconsistent readings, missing parts, and poor design. Overall, it's seen as a useful tool, provided expectations are set for its limitations.
What Reviewers Are Saying
Product Accuracy
60%
Many users cite issues with the accuracy of the tester, noting that repeated measurements yield inconsistent results. While some testers achieved expected readings, others reported discrepancies compared to calibrated springs, leading to disappointment.
Usability
50%
Reviews reflect a mixed experience regarding usability. Some users found the tool easy to handle and effective for their needs, while others encountered design flaws that made it difficult to use effectively, particularly with certain spring types.
Missing Parts
25%
Several customers reported receiving the tester without essential parts, like the adapter for larger screws. This missing component contributed to a frustrating experience for those who needed it to perform effectively.
Value for Money
40%
The product is considered a reasonable investment for casual users looking to test recoil springs. However, customers noted that those requiring high precision might need to look at more expensive alternatives.
Customer Support
20%
Feedback on customer support varies. Some users reached out regarding issues and shared their experiences with returns, indicating a possibility of support but also frustration with the product performance.
spring tester
All the springs I tested measured 25#'s+. Also, the readings wouldn't remain on the screen when pressure was released. I found it difficult to use. I plan to experiment some more with with it--but am disappointed so far!
I sent mine back
After waiting months for it to be in stock, I was extremely disappointed to find the readings were not repeatable. I measured Wolff and ISMI springs and the readings were all over the place. Measuring the same spring repeatedly, I never got a duplicate reading. Maybe the fact that the hook would not go into the hole all the way contributed. Really, the pull should have been in line.
Don't waste your money
Tester is only good to measure gov't model recoil spring tensions. There is only 1 witness mark to show 1.625" compression on the tube. Per Wolf Springs, spring commpression needs to be a mark at 1.625" for gov't models, another at 1.125" for commanders, and another at .700" for O.M. If you try to use the current witness mark, a new 18# commander spring only weighs about 13# Also the adapter is totaly useless. Instructions say test other springs (main / hammer springs) by pulling to current witness mark. The scale shows 6 brand new 23# hammer springs only weighing 12# I called the manufacturer and explained the problems. I'm returning my unit This may explain better what I'm talking about. http://www.calguns.net/calgunforum/showthread.php?t=204458&highlight=recoil+spring+tester
