Caleb's BRN-22 Build
Caleb walks through BRN-22 receiver options and the components behind his custom build.
BRN-22 STRIPPED RECEIVER FOR RUGER® 10/22® Reviews & Ratings
Reviews Summary
The BRN-22 receiver for Ruger® 10/22® has received mixed reviews. Many praised its high quality, aesthetics, and compatibility with aftermarket parts, leading to impressive accuracy. However, numerous users reported fitting issues requiring modifications, particularly with bolt and barrel installations. Overall, while some builds were flawless, others experienced significant challenges, leading to disappointment.
What Reviewers Are Saying
Quality and Finish
65%
Many reviewers appreciate the overall quality and aesthetic of the BRN-22 receiver, describing it as well-made and visually appealing. Comments highlight a solid structure with a clean finish, although some noted that the anodizing could be scratch-prone. *Percentage: 65%*
Fitment Issues
70%
A significant number of reviewers encountered fitment problems, especially with installation of bolts and barrels. Instances of requiring filing and modifications to ensure proper fitting were frequently noted, which detracted from the overall experience for many users. Such issues raised concerns about the product's tolerances and quality control. *Percentage: 70%*
Accuracy and Performance
60%
Several users have reported excellent accuracy after assembling their rifles with the BRN-22 receiver, particularly when paired with aftermarket components. These experiences emphasize that the receiver can perform exceptionally well once proper fitting and assembly are accomplished. *Percentage: 60%*
Value for Money
55%
Reviewers generally consider the BRN-22 receiver to be a good value, especially when on sale. Many felt it provided a high-quality option compared to OEM parts at a lower price point. However, the need for additional fitting work can diminish perceived cost-effectiveness. *Percentage: 55%*
Customer Support and Service
40%
Customer interactions with the Brownells support team have been mixed. While some reviewers reported prompt responses and helpful guidance, others expressed dissatisfaction, particularly when seeking assistance for product defects or receiving no replies. *Percentage: 40%*
Ruger 10/22 Stripped Receiver
Product: The receivers (I bought 5) came exactly like I needed them to be. However, upon placing the bolt and charging handle into the receiver and then attaching them to the trigger assembly the bolt has a hard time charging and will not release all the way to the barrell entry. It is like the groove for the bolt slide did not get milled long or deep enough.
Would you recommend this?
Yes, I would recommend to a friend
Disappointing Finish
The reciever fit was very goid everything was easy to install, bolt, barrel, scope...but the finish while perfect when recieved did not hold up. While installing the trigger cross pins, and bolt buffer stop marks became apparent and permanent even when taking care. Also after shooting and cleaning, which required removing the receiver from the stock othe wear marks become apparent. I did take notice that the finish is not stated to be "Hard Coated" but it is not holding up.
Mixed Feelings
This was my first rifle build and the brownells bolt and receiver cycled very well for a new gun. Only a couple failures to cycle and I was using junk thunderbolt ammunition. After 2 mags and she was cycling like a charm.
I got the receiver with rail. I had a spare quick disconnect vortex AMG UH-1 (gen 1) optic that I wanted to put on the gun. The rail is too low to the rest of the receiver to allow the quick disconnect to rotate on the rail. My conclusion is that the rail is probably a little bit too low on the receiver. I had to settle for traditional rings.
I got a fedderson barrel and it did not have an interference fit. I believe that heating the receiver and chilling the barrel for an interference fit can be desireable.
Ultimately, I am greatful for the opportunity to build this rifle, but brownells has the room for improvement with this product.
I don't like the finish texture
If I had known about the finish I would have passed. I got the natural silver finish. It is very rough like it was blasted with a agressive media. It feels like 400 to 600 grit sand paper.
Meh.
Quality looks good, but the Brownells bolt doesn’t fit the receiver at all!!
10-22 Build
After watching the custom built 10-22 videos, I wanted to buy the components needed to build my own custom 10-22. But, I was disappointed by the fact that all to 10-22 parts bundles offered were out of stock. I did catch the Brownell’s 10-22 receiver on sale. Disappointed that I could not purchase all components at the same time.
Trigger fitting req’d; understatement!
Bolt would not move at all. 30hrs later still binding .030 out of battery. Maybe another 10hrs ? Tolerances are too tight in my opinion.
Receiver finish a bit disappointing
Not good for suppression.
Fit and finish are quality. Had zero issues with fit with my build. The only negative is the hole in the rear, directly rear of the bolt. Not sure why it’s there but it allows a lot of gas to the face when shooting with a suppressor.
Slight let down
Nice receiver, but required gunsmithing to fit a barrel
Finish not that nice
For a machined piece the overall finish is rough. Required minor trimming because it is not an exact original piece.
