AR-15 TT-AR-15 TRIGGERS ADJUSTABLE Reviews & Ratings

I love this trigger so much I had to buy one for all my ARs. As long as you dont mind the fairly short first stage, there really isnt anything possible to dislike. The pull weight is easily and accurately adjusted, and like all TriggerTech triggers Ive used across various platforms the break truly is creep free and perfect. Not really a negative, but if you are curious what happens if you adjust the pull weight below 2.5 lbs, your rifle may malfunction. 2 or 3 rounds per, hammer follow. 100% reliable across 4 units when pull weight is at or above 2.5 lbs.

Very clean break, very small movement for first stage and easily adjustable for oz pull down to 2.5 oz. I like curved triggers, but they do make a straight blade.

I needed a drop in trigger that was adjustable for different match requirements, and was excellent at the break. This trigger meets all my requirements and exceeds my expectations. Installation was easy in less than 10 minutes. Adjustment is a snap, just count the clicks. After setting the trigger pull for one weight I need, I then counted the clicks until it was set for a lighter pull that meets those requirements. Now, to set the trigger from one setting to the other, I simply push the rear take-down pin, lift the rear of the upper receiver, insert the allen wrench in the adjustment screw on the top toward the rear of the unit, turn it and count the clicks, then close up the receiver. Takes about 2 minutes. And yes, it's repeatable. I've changed the setting and double checked the pull over a dozen times now and it's exactly on. The trigger break is as crisp as breaking glass, it just doesn't get any better. It's a short first stage and I prefer a long first stage. I wish they would offer the same trigger with a longer first stage to better match my other rifles, but that's a personal preference and not really even as much of a critique. The quality of this trigger, the feel, and the crisp break are fantastic. With the adjustibility, this could very well be the best trigger I now have.

Incredible trigger, like nothing you'd expect in an AR platform. I've owned or at least used all the big name triggers, there simply no comparison. Triggertech is absolutely unbelievable.

I did not like the trigger that comes with the G2 SASS and I opted to buy another one. Trigger Tech fit perfect the first time. Easy to put in and super smooth. I love it.

I've fired about 50 rounds with this trigger in my new coyote gun, and it's just awesome! Followed the installation instructions to the letter, adjusted it down to its safe minimum right off the bat, and went shooting. It seriously has ZERO creep! I just wish that the flesh of my finger didn't have any... Beautifully smooth, whisper soft first-stage, too. Can't say enough good about this trigger!

I have about 1000 rounds with this trigger at the moment and have found no faults with it. The takeup is smooth and minimal. The break feels like you're snapping a glass rod and you have only a millimeter of overtaravel. The adjustable feature works well and doesn't change the feel of the trigger, it just increases or decreases the pull weight of the second stage. No complaints, the high price is worth it. Would always recommend

I had been curious about this trigger for a while, and didn't realize there was a flat version. Add in a discount code and I bit. I moved from a Geissele SD3G with several thousand rounds of live fire and dry fire on it to this as the SD3g had become essentially 100% really smooth creep with a trigger break hidden somewhere in there, and while it was great for close in pit stages, it was frustrating me when trying to execute longer range shots well. This trigger has INCREDIBLY crisp break and an extremely tactile and predictable breaking point. Reset is also short and positive. More positive than my SD3G, CMC drop ins, JP single stage or mil-spec(ish) triggers. The amount of concentration I have to dedicate to staging and breaking the trigger for precise shots dropped a TON, and being able to concentrate on sight picture, breathing, and just generally being more relaxed showed immediately in my group sizes. Not really smaller at the minimum (doesn't make your load or barrel more accurate), but being able to repeat my best or real close to it over and over and over. I was concerned due to the firm wall before the break that it might slow me down on the hoser stages. Nope. I run it faster than the SD3G. I'm very pleased with this trigger. BUT. There's some things you should probably know to make things easier. 1) FOLLOW THE INSTRUCTIONS. It takes you through the proper steps in the least frustrating order, and it takes you through the safety function checks specific to this trigger. For my own sanity I always add mortaring to my safety checks, and it passed. The instructions have some checks I consider atypical and trigger specific. DO NOT SKIP THEM. 2) I was also concerned about the reviews I read here and elsewhere with problems with it not passing the safety checks and doubling. First, run a light trigger in a semi-auto with poor follow through, and you risk bump firing it for an unintentional double. Use good technique or don't run a light trigger. Second, follow the instructions. Many of the malfunctions you will see people gripe about are due to not installing it correctly. Put it in right, make sure it is happy with the safety selector hardware, and snug it down just like in the instructions. Third, I seriously suspect there has been a revision to the triggers mechanics, some QA change, or the adjustable range has been reduced. If you dig through the internet for reviews and marketing material, you will see older ones where it's adjustable range is quoted as 1.9 or 2 lbs to 4.5 lbs, and the out of the box setting as shy of 2.5lbs. Newer material and the instructions say the floor is 2.5lbs and the out of the box weight, from my experience and a number of forum posts and youtube comments, seems to be 3.5lbs. Owners commenting from the last year have similar experiences to mine, and no malfunction issues provided they install it per the instructions and don't go below 2.5lbs. (more on that next) 3) Measuring trigger pull and adjusting: This trigger frustrated the heck out of me trying to adjust it initially. I could crank it up to ~5lbs, but it seemed to hit 3lbs at one point and stay there no matter how much you unscrewed it. This turned out to be a technique issue with my spring based trigger scale vs this trigger. My technique has worked fine on my an array of triggers pulling 1.8-2.5lbs and checking my 9oz single set trigger on one gun was only a mild pain, but apparently it is not enough for this trigger. I really had to be VERY slow and deliberate and basically increment one notch on the scale at a time until it went click. Even so, The adjustment screw tried to back out before I hit 2.5lbs and on general principle, I wanted to be more than one full rotation or more from actually still threaded in there. This took me to 2.75lbs. After a range trip and about 300 rounds of ammo, I checked it when I got home and that 2.75 had turned into ~2.4lbs. I bumped it back up to 2.75 and after another 200 round range trip, it seems to be holding steady. I would not adjust it to the ragged edge before at least some live fire, and would probably even recommend leaving it where it is out of the box until you get a little live fire in on it. And be certain your trigger scale is not lying to you. I will also say that this trigger is extremely usable at 4-4.5lbs. Much more so than other triggers I have used with more creep or less precise break. I found it a bit surprising, so felt it was worth noting.

This drop-in trigger is technically a 2 stage, but the first stage is quite light and would be hard to feel with gloves. The second stage breaks perfectly and the reset is very short and crisp. almost no detectable overtravel. I use this on my AR-6.5 Creedmoor and could not be happier with it's performance. One note: I tried to install the Elftmann Tactical, AR-15 Speed Safety (push on/off) and found it interfered with this trigger. This trigger works fine with mil-spec and Seekins lever type safety selectors.

Wonderful trigger fast shipping thank you brownell.