AR-15 SE-1 PISTOL GRIP Reviews & Ratings

Drop-in replacement for factory pistol grip is designed to give the tactical operator maximum weapon control with minimum fatigue. Every aspect of the shooter-to-weapon interface was analyzed and tested to improve on the USGI A2 grip and give the shooter the best control in any type of operational environment. One-piece construction with integral triggerguard ensures the operator’s finger doesn’t get caught between the guard and the trigger and eliminates other pinch points. Over-molding where the grip meets the receiver helps keep the hand positioned exactly where it should be during fast movement, long periods in the ready position, and during rapid or full-auto fire. Palm swell, arched backstrap, flared bottom with forward finger ledge, and molded-in stippling further ensure to a firm, stress-free grip on the weapon. Molded from durable, reinforced polymer that resists impact, temperature extremes, moisture, and most cleaning solvents and oils. Snug-fitting, synthetic rubber plug in the bottom pulls out to allow storage inside the grip. Cavities inside the plug provide rattle-free storage for two spare CR-123 batteries. Standard SE-1 model available in Black.

SPECS: Molded polymer, Black. Includes mounting hardware and instructions.

See all of our AR15s and AR15 parts here.

View Product

Write a review

3 Stars

1 Stars

Reviews Summary

The AR-15 SE-1 Pistol Grip is widely praised for its comfort, ergonomic design, and ease of installation. Many users highlight its ability to align the hand naturally for better control, with some mentioning the integrated trigger guard as a significant improvement. However, concerns arise about the grip's surface material being slippery and less comfortable for some users compared to other options.

What Reviewers Are Saying

Comfort and Ergonomics

60%

Reviewers often emphasize the comfort of the Stark grip, specifically its ergonomic design that allows for a more natural hand position. Users feel it alleviates wrist strain, which enhances shooting experience during prolonged use.

Installation and Fit

50%

The grip's easy installation process is frequently noted, with many users appreciating that it fits snugly on various AR platforms. The straightforward installation, requiring minimal tools, is a recurrent positive aspect mentioned in reviews.

Surface Material and Grip Texture

40%

A few reviewers expressed concerns about the grip's surface material, describing it as smooth or slippery, which can be problematic, especially during wet conditions. Users have suggested modifications, like using an inner tube for better traction.

Trigger Guard Design

35%

The integrated trigger guard design is frequently praised as a major improvement. It provides a seamless look and eliminates gaps, enhancing overall functionality. However, a few noted that it can hinder rapid access to the safety selector in tactical situations.

Durability and Quality of Materials

25%

Many reviewers commented on the overall construction quality of the grip, noting that it feels robust. However, concerns about durability are raised regarding specific features like the Armorsoft coating, which some found less durable than expected.

Sort by Filter by rating

Great grip but..

This is the second grip I have purchase, made by Stark. I really like this grip a lot. It places your trigger finger parallel with the AR frame receiver straight toward the trigger. The palm swell are ambidextrous. There's also an ambidextrous ledge where your trigger finger or thumb can rest onto. I also like the battery storage in the grip in case my Eotech 512 need a fresh battery. This grip is easy to install. I have the early version of this grip and it is fine. The stippling is good and the area without stippling is somewhat slippery when your hand gets wet. However with the flaring at the bottom of the grip, does prevent your hand from slipping off the grip all together. Recently I purchased another Stark grip for my new AR build with a nice Armorsoft coating on the grip. The feel is great and it makes the grip less slippery, velvety feel to it. It enhances the gripping factor. The new grip retains it's same characteristics which is great BUT on my new grip, the Armorsoft rubbed off especially around the well opening. I have noticed that when I took the rubber battery holder of the grip, the coating was rubbing off from where my finger was exerting pressure while attempting to remove the battery holder from the grip. I know that Stark Equip makes quality product, this could be one of those that slipped away from QC. I have not use this grip for shooting yet. I'm disappointed with this Armorsoft.

#3 Behind ERGO and Hogue

I received my SE-1 AR-15 Pistol Grip in the mail on Thursday and took it to the police department armorer today (Fri. 7-22) to have it installed. I have pro's and con's about it but please, it is constructive criticism, not complaining. I took an ERGO grip off to put on the Stark. That is the comparison here. 1. The Stark grip feels larger in diameter than the ERGO. I don't have large hands so for me it is instead of the grip fitting into my hand, it is more my hand has to work to fit the Stark grip. 2. The "grip" of the SE-1 is not as solid to the touch, but more as if it is smooth polished plastic and my hand has to squeeze down on the grip to hold it in place. The ERGO has a more soft rubber material and the friction is there to hold tight with little effort. The Stark seems to require more effort to hold tight. The rippling of the plastic on the Stark is ok, but would be better in conjunction with a soft finish material, not the hard plastic. I tried using a padded bicycle glove as a shooting glove to hold the SE-1 and it helped, but are you going to use a glove everytime you go shooting. What if CQB starts and your glove is in the house? The grip just has a slickness about it, to hard and slippery. 3. I have more than one AR, three have the ERGO grips and one has the Stark. I am able to pick up the ones with the ERGO grip, then put it down and pick up the Stark, all for the purpose of comparison. So far, the comfort of the ERGO is outweighing the Stark. Today, a friend tried the grip and had a mediocre opinion. The two more friends all held the AR with the Stark and just had no real enthusiastic response. There was no overall, total excitement over the fit and feel of the grip. I don't know what to say or tell you as to what to do, it looks good and the storage is adequate, but other than that, really nothing. Fh.

Not So Useful for L.E./ Military

I bought this based on the reviews which are all saying this thing is awesome.. I installed the grip and I kreally liked the integrated trigger guard and the way it indexes my hand lower on the rifle. When I used the grip today in training, I was not happy that the selector can't be operated without having to index my hand and give up a stable firing grip. This may not be a big deal in target shooting, but this is not a practical grip for a tactical enviornment where getting the gun off safe in a hurry could mean your life.