Freedom To Boom Deals Extended!
12% Off Almost Everything w/ Code: FREEDOM12 Or Free Shipping On $99+ w/ Code: 99FREESHIP

Freedom To Boom Savings Extended!
12% Off Almost Everything w/ Code: FREEDOM12 or Free Shipping On $99+ w/ Code: 99FREESHIP

Daily Deal: Halo Optics K2000 10x42 Rangefinder Binoculars ~~$349.99~~ $299.99- Get Yours!

AR-15 SE-1 PISTOL GRIP Reviews & Ratings

Drop-in replacement for factory pistol grip is designed to give the tactical operator maximum weapon control with minimum fatigue. Every aspect of the shooter-to-weapon interface was analyzed and tested to improve on the USGI A2 grip and give the shooter the best control in any type of operational environment. One-piece construction with integral triggerguard ensures the operator’s finger doesn’t get caught between the guard and the trigger and eliminates other pinch points. Over-molding where the grip meets the receiver helps keep the hand positioned exactly where it should be during fast movement, long periods in the ready position, and during rapid or full-auto fire. Palm swell, arched backstrap, flared bottom with forward finger ledge, and molded-in stippling further ensure to a firm, stress-free grip on the weapon. Molded from durable, reinforced polymer that resists impact, temperature extremes, moisture, and most cleaning solvents and oils. Snug-fitting, synthetic rubber plug in the bottom pulls out to allow storage inside the grip. Cavities inside the plug provide rattle-free storage for two spare CR-123 batteries. Standard SE-1 model available in Black.

SPECS: Molded polymer, Black. Includes mounting hardware and instructions.

See all of our AR15s and AR15 parts here.

View Product

Write a review

3 Stars

1 Stars

Reviews Summary

The AR-15 SE-1 Pistol Grip is widely praised for its comfort, ergonomic design, and ease of installation. Many users highlight its ability to align the hand naturally for better control, with some mentioning the integrated trigger guard as a significant improvement. However, concerns arise about the grip's surface material being slippery and less comfortable for some users compared to other options.

What Reviewers Are Saying

Comfort and Ergonomics

60%

Reviewers often emphasize the comfort of the Stark grip, specifically its ergonomic design that allows for a more natural hand position. Users feel it alleviates wrist strain, which enhances shooting experience during prolonged use.

Installation and Fit

50%

The grip's easy installation process is frequently noted, with many users appreciating that it fits snugly on various AR platforms. The straightforward installation, requiring minimal tools, is a recurrent positive aspect mentioned in reviews.

Surface Material and Grip Texture

40%

A few reviewers expressed concerns about the grip's surface material, describing it as smooth or slippery, which can be problematic, especially during wet conditions. Users have suggested modifications, like using an inner tube for better traction.

Trigger Guard Design

35%

The integrated trigger guard design is frequently praised as a major improvement. It provides a seamless look and eliminates gaps, enhancing overall functionality. However, a few noted that it can hinder rapid access to the safety selector in tactical situations.

Durability and Quality of Materials

25%

Many reviewers commented on the overall construction quality of the grip, noting that it feels robust. However, concerns about durability are raised regarding specific features like the Armorsoft coating, which some found less durable than expected.

Sort by Filter by rating

Awesome!

It feels so darn good in my hand i dont want to put it down. The best grip by far hands down. great quality to.

Well worth the money

Very nice and comfortable grip. The grip has all the features you would want. The groves in the grip help keep your hand in the same spot each rime. The elimination of the trigger guard with a more open guard that is an extended part of the grip also covers the gap between the grip and the lower is a big plus in my book.

Best grip I have ever used on a AR- A+.

Most comfortable Grip I have ever used,very easy to install,none slip material is very comfortable,grip angle is very comfortable,will buy them for my other rifles

Solves a multitude of problems and needs

I'm buying one for each of my carbines. The benefits? Do a training class for a while, and any little abrasive surface will start to make your fingers bleed or abrade. This grip eliminates the ones you'll typically encounter while shooting, engaging and disengaging the safety. When the jump recoils, your hand is usually gripping fairly tight - if you're not wearing gloves after a hundred rounds or so your hand will get a few sore spots. Not with the stark. It replaces your abrasive trigger guard, enlarging the area (like the Magpul one) You wont have to replace the buffer assembly backplate, because you can get the PB model to clip on your sling. It's ultra smooth and changes the angle your hand has in relation o the FCG such that working CQB problems is easier on the wrist and forearm, you wont have to shove your forearm out to the side to ease the pressure on your wrist - at some point fatigue sets in with the other grips if you're 18 you don't notice it, I'm not 18 anymore, the ability to keep my elbows tucked in while maneuvering - priceless. I've met one guy who WANTED to use this grip, but couldn't, the palm swell was too much for his hands (6 feet tall and hands like a 10 year old). Everyone I've introduced this grip to bought one. The newer type has the sticky type finish on it, the older ones are slick, but sweat has never caused me to slip on this grip.

Very comfortable AR15 Grip

I was suprised how easy it was to change the grip, it gives the AR a better feel and for me it made it easier to handle.

My new favorite grip

Ever since Pachmayr stopped making the rubber grip for the AR (the one that looked like a revolver grip) I have been searching for a replacement. Like the Pachmayr, the Stark grip straightens out the grip angle and is more comfortable on my wrist. It also moves the hand down more and provides a better pull on the trigger for me and is a bit larger than most grips. Love it!

Great Pistol Grip Alternative

I bought this grip for an AR Build, the construction is excellent, it slipped right onto a STAG lower with no gap or play at all. It installs exactly like the factory standard pistol grips that normally come with either lower kits or complete rifles. My only recommendation is to consider this grip before installing the flat style trigger guard so that you do not have to remove the roll pin. Tools required: small flat head screw driver and a hex bit. I used a common house hold bit kit to install the grip in under 5 minutes. EXCELLENT PRODUCT!

Outstanding Grip

This grip is the "cure-all" to the AR15 trigger gap. It fits my hand very well and overall looks and finish are top notch. Installation took all of 2 minutes. Only one complaint: Where's the camo version?

One of the best grips on the market!!!

Bought this for my wifes AR15 for IPSC & 3 gun matches. Fits well in her smaller hands (she's 5'6" tall) & she loves it. Have just ordered 1 for my other AR as it fits my bigger hands (I'm 6'4" tall). The straighter angle makes keeping your elbow tucked in a lot easier & puts less strain on your wrist.

Best In Class

Places your hand perfectly to manipulate all of the controls easily. Hand is placed slightly lower and at a straighter angle. Magpul is now second class. There is even a thumb rest built into (ambi) the grip. Your thumb falls naturally to this position. Best Grip on the Market today. PERIOD!