A Functioning Trigger
I needed a quality basic trigger for a build and this worked perfectly.
Would you recommend this?
Yes, I would recommend to a friend
Smooth Trigger
Installed these on multiple rifles, very smooth, great value. Provides that step up from a normal mil-spec. Highly recommend!
Would you recommend this?
Yes, I would recommend to a friend
Great trigger for a self defense AR
I have installed and used every AR trigger from the polished Bill Springfield ones (bad cause they wear away) to regular Colts , Geissele DMR Match SSA SSF SDs, the ALG Defense ACT, and now this BCM PNT. The latter two are the ones I recommend for any AR except DMR or varmint type guns. Some reviewers here did not like the trigger pull, which for this and the ACT are typically a little less than 6 pounds. I guess they need to spend the extra $170 for the lighter pulls of the other units. This trigger has a smooth take up, a crisp release, and u can ride the reset to make it feel lighter. For a self defense rifle this is the best, and you can avoid an accidental discharge a lighter pull risks.
Love this trigger
Love this trigger. Everything about it is SMOOTH. Every build from now on will have this.
Great Combat Trigger
I don't want to carry a carbine with too light a trigger. Just in case the shooting goes to court. What I want is a trigger that is breaks clean and has no creep or grittiness. And this BCM offers all that. Was easy to install.
My wife prefers this to the G2S!
Trigger is impressive, think of it as a step up from a ALG Defense ACT halfway between that and the Geissele 2 stage. The BCM PNT is very clean, very crisp, and has a 5-6 lb pull. I was blown away at how good it is for the cost, minimal first stage that is barely noticeable, then a nice break. Crisp hard reset. Would definitely buy again.
You will be very pleased and then some.
I've bought several of these for my builds and you can't go wrong. A fantastic trigger for the price and don't shy away because of that. No cons to this trigger at all.
Excellent AR Trigger
I used this trigger in my AR-15 300 Blackout build. Fantastic trigger, great function and solid. While a drop-in trigger would have been nice, this one is smooth, clean, and breaks well. If you are building a mil-spec rifle this is a great trigger.
Impressive
My comments here are basically on installation. It was a breeze. I pulled the trigger pin out of the trigger and disconnector and by hand inserted the trigger, disconnector, and pushed the pin through the lower receiver. No tools, hammer, etc. On the hammer I did insert a punch pin from the right side to hold the hammer in place. I then used hand pressure and jiggling to push the hammer pin through the hammer and the lower receiver. Only about 1/8" of the pin stuck out and I used a plastic marker pen and brass hammer to set it flush. No scratch marks on the LR. Using a dummy round I tested the trigger pull and it feels smooth. I was impressed with the quality. All springs are pre-assembled and in place. The trigger and hammer pins are inserted as in the picture.
Worth the money.
Really good trigger for the money. Trigger pull gauge shows around 5 1/2 pounds, with no creep or grittiness.
