Daily Deal: Brownells Gun Scrubber Aerosole Cleaner ~~$8.99~~ $6.99- Get Yours!

1911 TRIGGER Reviews & Ratings

1911 TRIGGER

Precision-machined, curved shoe with a finely serrated surface provides good feel and trigger control. Shoe height is slightly oversized for precise fitting. Stainless steel bow gives smooth, no-flex trigger movement. Overtravel stop screw prevents creep.

Available with Solid shoe in short length or Drilled, 3-Hole shoe provides an even lighter trigger pull; long length only.

SPECS:

Aluminum, silver anodized shoe; polished stainless steel bow.
Shoe – 1/4" (6.3mm) wide, 15/16" (23.8mm) high.
Overall length measured from center of shoe to end of bow.
Short – 2.05" (5.2cm) OAL.
Long – 2.24" (5.7cm) OAL.
Gunsmith fitting required.

View Product

Write a review

Reviews Summary

The Ed Brown 1911 trigger garners mixed reviews, praised for its quality and smooth operation but often criticized for the need for extensive fitting and occasional manufacturing defects. While some find it an excellent upgrade, others experienced issues with fit and craftsmanship, leading to frustration and dissatisfaction. Overall, it heads toward a match-grade product with a few caveats to consider.

What Reviewers Are Saying

Fit and Adjustability

65%

A significant theme among reviewers is the need for fitting and adjustments to install the Ed Brown trigger properly. Many noted that while some fitting is expected with match-grade parts, several reviewers expressed frustration with excessive work required to get the trigger fitting correctly. This resonates with approximately 65% of reviewers.

Quality and Craftsmanship

40%

Opinions on the trigger's overall quality vary notably. While some reviewers lauded its construction and performance, others reported issues such as poor machining and misalignment. This dissatisfaction with craftsmanship is noted in about 40% of the reviews, suggesting inconsistency in quality.

Installation Ease

35%

Several users mentioned that installation could be straightforward, provided one is mechanically inclined and willing to do minor filing. This aspect is deemed a positive feature by approximately 35% of reviewers, reflecting a balance between ease of use and the required knowledge for fitting.

Performance

50%

Once fitted correctly, many reviewers praised the trigger for enhancing pull quality and overall firearm performance, being crisp and smooth during operation. This positive reception for performance can be attributed to around 50% of users after successful installation.

Value for Money

30%

Despite mixed reviews on fit and quality, several customers feel the Ed Brown trigger is a good value, especially when compared to similar products. Many recognized satisfactory performance relative to the price paid. This sentiment is expressed by roughly 30% of reviewers.

Sort by Filter by rating

Exactly what I needed.

Very well made, had to do some fitting but the final result was worth it.

Would you recommend this? Yes, I would recommend to a friend

by Wesley Poole on April 11, 2025

Verified Purchase

Was this review helpful? 0

1911 trigger by Ed brown

Ed Brown products are the best and always fir perfectly!

by ROBERT BLOETH on August 16, 2024

Verified Purchase

Was this review helpful? 0

Great item

I purchased this for my Rock Island 1911GI model it did require a few small adjustments. I was able to fit this without going to a gunsmith. The instructions come with the item

1911 Perfection!

Awesome trigger that complements any color frame or grips! Requires sanding on top, bottom, and sides of the shoe to allow the trigger shoe and bow to slide into the frame. I used 320, 600, 1000, 1500, and 2000 grit 3M Wet/Dry sandpaper for autobody finishing to achieve a "drop in" fit, literally. (stand on the muzzle end of frame and allow it to slide into the tracks in the frame under the pull of gravity.) Using an Norton Ultra Fine Arkansas stone I broke the sharp edges on the bow, magazine and frame sides. Polished entire trigger and bow with Meguiar's Mag and Aluminum Polish. It works in the firearm now like ball bearings on glass. Excellent finish and construction. I highly recommend this trigger!

3-hole trigger

it is a good trigger but it is lite for a commander lot of flex

requested review

It worked. As instructions stated, file down small amount of trigger body to allow to fit snuggly into firearm. Nothing else needed. I am a gunsmith but anyone could have used this replacement. It replaced a light trigger that was in an expensive STI which I sold the customer. Apparently he somehow managed to bend the original or it was defective. Straightening it with the tool inside it did not fix so had to replace.

Very ltttle work required

Put this in a 1911 builders frame.Just a little filing on the top with a file,Seems to need very little on the front top especially. break the corners to a little chamfer, stone and Bob is your uncle. Wish it came with the little hex wrench.

Short trigger

Bought it for myself Easy install . Adjusted with a few strokes of a file. Easy to adjust over travel.

Great trigger

Put this in my Springfield GI 45. It did require I minor bit of filing, but definitely fine for DIY. Looks great. Feels smooth. Less play than stock. Great price.

As advertised and a great rproduct

This is the perfect example of a match grade part. I fitted this to a MIL Spec Springfield 1911. A little filing was needed on the top and it fit perfect. The other reviews complaining about have to fit this part should not be replacing parts on their guns. Most match grade parts require some fitting and it states that in the description. If you don;t want to fit a match grade part, keep your firearm the way it is. Top grade parts as usual from Ed Brown. Total time to install, including fitting - 10 minutes.