Freedom To Boom Deals Extended!
12% Off Almost Everything w/ Code: FREEDOM12 Or Free Shipping On $99+ w/ Code: 99FREESHIP

Freedom To Boom Savings Extended!
12% Off Almost Everything w/ Code: FREEDOM12 or Free Shipping On $99+ w/ Code: 99FREESHIP

Daily Deal: Halo Optics K2000 10x42 Rangefinder Binoculars ~~$349.99~~ $299.99- Get Yours!

BARREL VISES W/ BUSHINGS Reviews & Ratings

To complement our “Ring-Of-Steel” Action Wrench System, we’ve developed the only professional-quality Barrel Vise that will positively clamp and keep even the tightest barrel from turning during removal. Machined from solid steel for durability to service the barrel installation and removal needs of any gunsmith for years and years. Our exclusive four bolt system and extra-wide design generates so much holding force, the Brownells Barrel Vise must be firmly bolted to the stoutest bench or an immovable base to realize its full potential. Split barrel bushings come in a variety of sizes to fit many popular barrels (and some not-so-common ones) to make this universal Barrel Vise system the very first choice of professional gunsmiths. Steel Bushings provide years of service and have the necessary clamping power to break loose the tightest barrels. Aluminum Bushings also give a strong hold without risk of marring your barrel.

SPECS: Blocks - Steel, blued. Top Block - 4-1?2" (11.4cm) x 3" (7.6cm) x 1-1?2" (3.8cm). Bottom Block - 7" (17.7cm) x 3" (7.6cm) x 1-1?8" (2.8cm). Includes 4, 1?2"-20 x 2" Allen head bolts. Bottom block is drilled and countersunk for 1?2" diameter mounting bolts. Bushings - C.R.S. Steel, blue finish or 6160 aluminum, natural finish. All bushings 3" long, -13?4" diameter. #4, 7, 8, 9, 10 and 11 are in a range of I.D.’s to closely match the shank diameters of most rifle barrels. #5 fits military Mauser 98 barrels. #6 is tapered to fit Remington factory .30-06 Sporter and other similar profile barrels. #12 & 13 are a special machined set of bushings for standard and heavy M14/M1A/M1 Garand barrels. #15 is for the FN FAL barrel. #16 is an aluminum bushing for ѕ" octagonal barrels. Steel and Aluminum Barrel Vise Sets come complete with the four Ѕ"-20 tpi x 2" Allen head bolts, hex wrench, and bushings #4, #6, #7, #8, #9, #10 and #11. (Bushings #5, 12, 13, 14, 15 and 16 must be purchased separately).

View Product

Write a review

3 Stars

2 Stars

1 Stars

Reviews Summary

Customers rave about the Brownell's Barrel Vise, emphasizing its ability to securely grip barrels without damage. Many have experienced significant improvements over other vises, with fast shipping and ease of use. While a few noted the complexity of tightening screws, overall satisfaction is high, making it a recommended tool for gunsmithing enthusiasts.

What Reviewers Are Saying

Product Quality

90%

Reviewers consistently highlight the high quality and durability of the barrel vise, noting its effectiveness in preventing damage to barrels during removal and installation. This quality is reinforced with comments about the excellent machining and fit of the bushings, making it a trusted tool for both professionals and hobbyists.

Ease of Use

70%

Many users find the vise easy to work with, especially when compared to older or lesser-quality models. The vise allows for a simple setup and effective barrel changes, though a few reviewers pointed out that the four screws to tighten can be time-consuming but ultimately provide a secure hold.

Performance and Reliability

85%

The vise receives accolades for its performance, specifically in gripping various barrel types without slipping, even under high torque. Users mention successful applications on multiple rifle models, reinforcing the vise’s reliability for complicated tasks.

Shipping and Delivery

60%

Many reviews praise the speed of shipping for the vise, indicating a positive aspect of the purchasing experience that seems to contribute to overall satisfaction with the product.

Value for Money

75%

Considered a bit pricey by some, the majority feel that the quality, durability, and effectiveness justify the cost. Many users express regret for not purchasing the vise sooner, highlighting it as a worthwhile investment for gunsmithing enthusiasts.

Compatibility Issues

25%

A few reviewers mentioned limitations with specific rifle types, such as the M14, indicating that the bushings provided may not be suitable for all barrel sizes. This topic raised concerns for some potential buyers regarding the versatility of the vise.

Sort by Filter by rating

Don't bother with any other vise!

With a lot of cussin' I've managed to loosen a couple of barrels with an "oak barrel block" model of vise. I finally had occasion to try it on one of the early model 700 Remington's (the ones with the glued in 50% thread barrels that everybody has so much trouble with) and finally had to give in and order this one. After mounting and setting up this vise with the correct sleeve it took less than 60 seconds to remove the barrel. Wish I'd been bright enough to get one of these in the first place. Great product!

The last tool you'll ever have to buy!

For years, I have rebarreld rifles using a large 6" bench vise, and some custom machined aluminum blocks. Last month, a customer brought me a Remington 700 BDL in .270 Win, that was at least 20 years old. First, I put it in my blocks, tightened the vise as tight as I could, and using the Brownell's Action Wrench, tried loosening it. Barrel started slipping. Now, I used a "cheater bar" to tighten the blocks SUPER tight... Then started turning again, then BAM! My iron bench vise snapped! This is the tightest barrel I'd ever encountered! Well, I broke down and ordered the Brownell's Barrel Vise with #10 steel bushing (1.225"), since I aleady had the matching Action Wrench. Now, I tightened the barrel in my new vise, and noticed it starting to slip! The hex key included with the vise doesn't offer much leverage, so I used a long socket wrench with a hex key socket, and really tightened her down. Now, the barrel is locked down, but I simply don't have the strength to turn the action wrench! I had to take a small sledge hammer covered in rubber padding to hit the handle of the action wrench to finally break this action loose!! Bottom line, I would NEVER have been able to remove that barrel without damaging the barrel or action WITHOUT the Brownell's Barrel Vise (and matching action wrench with Remington 700 heads). I wish I would've purchased this vise years ago!

5 years running and no complaints!

Quite simply I love this thing. I use old business cards between the barrels and bushings and have not left a mark on any of my barrels. I use the vice to change out the barrels on my switch barrel guns. Super easy, no extra steps involved! I highly recommend this vice!

Works for Garands, not M14/M1A rifles

The product itself is very nicely made, the barrel vise and bushings are quality...But it will not work with an M14 type rifle. This set includes one small and one large bushing, and the M14 requires two large bushings no matter what its barrel weight. If you order the set of bushings separately you get THREE. Two large and a small. If you are working on heavy barreled Garands or M14 pattern rifles do NOT order this set.

Excellent Vice

I am a part-time custom gunsmith. I used one of the vices with wooden insert for about a year. I was disappointed due to barrels slipping especially on factory rifles. I finally decided I had had enough and purchased this vice set. I am very happy with the decision and I wish I had purchased it initially. Great product.

The Best

I have an older that always gave me problems with the barrels slipping. Don't know why I put up with it so long. This vise is absolutely marvelous.

Time consuming, but works well

The four allen screws are a little time consuming, but it does the job.

Much better design ...

I also used the common wooden style for a while and got fed up with barrels slipping. A couple of years ago, I made myself one that is almost the same design as the Brownell's version (would have saved money just buying it if had been available at the time). One hint, if your barrel is between bushing sizes, you can take up the slack with a few sheets of aluminum foil used as shim stock and get the perfect fit on ANY diameter barrel.