WOOD PLUS - Marlin 336 Pistol Grip Stock, Brown

Finish, grain and color matched original late '60s, only lacks Marlin bullseye to be perfect. Take care when drilling for tang bolt but no big deal. Very minor fitting required.

wood is nice ,stock fit the rifle with no modification except for drilling hole for tang screw. I fitted the original marlin butt plate fairly easy. you can sand the pistol grip for a tighter smoother fit which i might some day but not needed for this old brush gun. I drilled the tang screw hole without drill press. i marked top hole then measured bottom of hole started with tiny drill bits top then bottom till holes met then bigger bits.just a little at a time check very often angle of drill take time do it straight. this was my first time im no gunsmith or woodworker.you can always take more wood off ,putting it back no fun at all. thanks Brownell for a great product at a great price. got it today on the gun in about one hour.

Recieved the new buttstock this evening, couple of hours shaving and sanding and it fits great. Nice to have my 336 back in action.

Wood was great once I finally got it a week later them it said. It required way more fitting then it should have . I had to remove over 5/16 of inch of wood in several places. With today's technology fitting should have been minimal. Took over 3 hours of trimming and sanding. The lower frame slot was way to wide looks terrible. Top slot for frame fit perfectly. I won't order another one

Some fitting required to make it work. Not a 100% match from the original stock that was on the rifle but it's close. Overall good quality.