WOLFF - AK-47 Magazine Spring, 3-Pak

I bought these as I needed a replacement spring for several FAL-BREN 30rnd 308mags. The width of the spring was perfect and the spring pressure was about 10 percent stiffer. Works like a champ!

If you have a 7.62x39 AR15, you know that even the 30 round ASC magazines can be a pain in the rear sometimes. Couple of tricks I use to make them 100% reliable. 1) Take it apart, and run a brass brush through the magazine body to clear any welding splatter and or debris. 2) Take a Dremel tool to the front lip of the magazine, and take off about 1mm so the necks of the cases don't catch on it while feeding. 3) Replace the factory ASC springs with these Wolff XP magazine spring made for AK mags to give more upward pressure on the follower to keep it from tilting and/or binding up. Voila! 100% reliable AR-15 7.62x39 magazines!

If you have a 7.62x39 AR15, and you use 30 rounder ASC or C-Product magazines - GET THESE SPRINGS IMMEDIATELY! These are AK mag springs and are longer and stiffer than AR15 springs in those mags. This helps with reliable feeding and to prevent the follower from tilting or binding up.