With Brownells MAGNA-TIP screwdriver, it is now possible for the gunsmith and firearms hobbyist to have a close fit in most any gun screw he will encounter - and darn near everything around the house and garage too. DESIGN OF BITS The TRUE hollow-ground bit transmits all the energy of twist (torque) evenly and smoothly, up the shank of the bit. Not only does hollow grinding permit this power transfer, it also gives complete metal-to-metal contact between the tip of the bit and the entire screw slot. Thus, maximum power can be exerted as in a finely tapered gun spring. So-called "hollow-ground" screwdrivers which have been dubbed off square, result in all torque pressures concentrating at the square edge of the grind along the tip. As every gunsmith knows, such a flaw in a spring results in breakage! Standard, straight-tapered screwdrivers deliver all torque pressures to the fine edge of the screw slot. PLUS, being tapered, the laws of simple physics force the bit OUT of the slot.The complete sets include eleven bits for slotted screws, #1, #2 and #3 Phillips bits, plus ten hex bits for socket head screws. PERFECT FIT You can get even more versatility, and an absolutely perfect bit-to-screw-slot fit by buying extra bits and grinding them to an exact fit using the special Shaping Stone shown on this page. MATERIALS USED The bits used in the Brownells MAGNA-TIP screwdrivers are manufactured expressly for heavy industry. They are used in high-speed, production, impact-power drivers for setting screws in mass production applications. They HAVE to be built with the right combination of hardness and durability to give maximum strength and wear! THE HANDLE Bits are held in the shaft chuck by a permanent magnet or spring clip. All permit fast changes from one bit size to another without the expense of owning several screwdrivers. Handle is shockproof plastic, with grooved flutes for a positive grip.
MAGNA-TIP Set No. 1 - Complete assortment of 24 Bits (#445-00, #445-0, #445-10, #445-20, #445-30, #445-1, #445-2, #445-3, #445-4, #445-5, #445-6, #440-1, #440-2, #440-0, #185-00, #185-0, #185-1, #185-2, #185-3, #185-4, #185-5, #185-6, #185-9, #185-10), plus MAGNA-TIP Handle of your choice, the Field Case and Bench Tray. Click Here to view Handles.
MAGNA-TIP Set No. 2 - The complete assortment of 24 Bits (#445-00, #445-0, #445-10, #445-20, #445-30, #445-1, #445-2, #445-3, #445-4, #445-5, #445-6, #440-1, #440-2, #440-0, #185-00, #185-0, #185-1, #185-2, #185-3, #185-4, #185-5, #185-6, #185-9, #185-10), plus the Handle of your choice, but DOES NOT include the Case and Tray. Click Here to view Handles.
MAGNA-TIP SET NO. 3 - 11 Bits for slotted screws (#445-00, #445-0, #445-10, #445-20, #445-30, #445-1, #445-2, #445-3, #445-4, #445-5, #445-6), the Field Case and Bench Tray, plus the Handle of your choice, but DOES NOT include the hex head or Phillips bits. Click Here to view Handles.
FIELD CASE & BENCH TRAY - Custom-designed Field Case of unbreakable polyethylene with live hinge and positive lock. Tray is indestructible ABS (they make football helmets out of that stuff), step-designed to take all 24 bits in Kit No. 1 and hold in order/in place, in Field Case. There's a Parts Well for sight/mount screws, specially shaped bits, and emergency spares for field/range repairs. The tray lifts out for bench use.