SONS OF LIBERTY GUN WORKS PATROL SL 5.56 16'

Sons of Liberty Gun Works we believe in Quality Mil-Spec or better parts. We believe there is no substitute for quality and that your gun should be built right the first time, ready for hard use right out of the box. We believe a quality Bolt Carrier Group and a quality, accurate and long lasting barrel are the heart of a Combat Grade weapon. We believe in properly tuned weapons using the correct gas system length and quality buffer system components such as Sprinco Tactical Buffer Springs. We believe in our products and we back them up with a Lifetime Warranty. Our weapons our meant to be used hard and go in harm’s way, they won’t let you down.

• Barrel: Sons of Liberty Gun Works 16” 4150CoMOV 1:7 MPI HPT Barrel
• Caliber: 5.56 NATO Chamber
• Barrel Steel: 4150 CrMoV (Chrome Moly Vanadium per MIL-B-11595E)
• Twist Rate: 1/7 Twist Six Groove
• Thread Pitch: 1/2-28 Threaded Muzzle
• Gas Block: .750″ Gas Block Journal with appropriately sized gas port
• Weight: 25 Ounces
• Barrel Finish: QPQ Corrosion Resistant Finish
• Barrel Extension: QPQ coated M4 Feed Ramp Extension
• High Pressure (proof) Tested (HPT)
• Magnetic Particle Inspected (MPI)
• With “F” Marked Taper Pinned Front Sight Block

Lower Receiver: Sons of Liberty Gun Works Forged Lower Receiver – Angry Patriot (or Loyal 9 available in May 2017 for LEO’s and Department contracts ONLY)

Material: Made from Mil-Spec 7075-T6 aluminum Cerra Forge forgings

Finish: Anodized to Mil-Spec MIL-A-8625F, Type III, Class 2, Hard Anodic Coating, Flat Black Dye, Non-Reflective, NiAc Seal

• Contour is fully machined leaving no flash marks from the forging.
• Hidden lowers are cut with M16 auto pocket.
• Safe, Fire, and Full Auto Pictograms.
• Angry Patriot Roll Mark

Buffer System:Mil -Spec Buffer System Receiver Extension: 6 Position Mil-Spec Receiver Extension Tube made from 7075-T6 Aluminum Buffer: 3.1oz H Buffer Buffer Spring: Sprinco Blue Spring Receiver end plate: Quick Detach End Plate with properly staked Castle Nut Fire Control Group: Liberty Fighting Trigger Trigger Guard: MAGPUL Polymer MOE Trigger Guard Black, FDE, Gray or OD Green The SOLGW Bolt Catch and Safety Selector are a Mil-Spec AISI8620 investment casting per the USGI TDP. (not to be confused with MIM parts in the commercial market) Our Safety and Takedown Pivot Detents are solid hardened Stainless Steel from KNS Precision Machine. SOLGW Magazine catch and Takedown Pivot Pins are machine from Mil-Spec AISI8620 per the USGI TDP, heat treated and coated per mil spec. Our Mag Buttons are made from steel per Mil-Spec versus the aluminum found in the majority of commerciHiddeny available LPKs on the market. Grip: Magpul SL Black/FDE/OD Green or Gray Stock: Magpul SL Black/FDE/OD Green or Gray Upper Receiver: Material: Made from Mil-Spec 7075-T6 aluminum Cerra Forge forgings. Exterior Finish: Anodized to Mil-Spec MIL-A-8625F, Type III, Class 2, Hard Anodic Coating, Flat Black Dye, Non-Reflective, NiAc Seal Interior Finish: Dry Film Lube T-Marks: Engraved T-Marks Charging Handle: Mil-Spec Charging Handle Gas Block: Sons of Liberty “F” marked Front Sight Block made from 4140 Steel and Nitride Treated Gas Tube: Sons of Liberty Standard Mid Length Melonited Stainless Steel Hand Guard: Magpul SL Mid-length Hand guard Black, FDE, Gray or OD Green Muzzle Device: NOX Pin and Welded Sights: Rear Magpul MBUS Sight Black, FDE or OD Green Front: “F” Marked Front Sight Block Accessories: One OKAY Industries Surefeed 30rd Mags, SOLGW Sticker & Patch, copy of the US Constitution, and LIFETIME Warranty Certificate"