All of Brownells, Inc. spray coatings have a heavy body for a more durable finish. During the time any of these products sit on the shelf some settling occurs.
A tornado, also known as a "twister" or a "cyclone," is a violent rotating column of air in the shape of a funnel that extends from the base of a thunderstorm to the ground.
Basic Application Instructions for New or Stripped Clean & Dry Wood
Un-pack the oven and make sure the unit is not damaged. The oven requires proper anchoring to prevent tipping and there are extended brackets at the base that can be attached to any non-flammable floor or bench.
Using spray finishes on your firearm can provide greater protection from the elements, fulfill a specific purpose like turkey or waterfowl hunting, and/or make additional accessories better match your gun’s finish.
Its funny how one little statement can get you thinking. “You know what would look cool™ A desert-camo 1911. That would really
I recently purchased
a Remington 870
at a local gun show. It had been well maintained, but with
every gun that
sees a lot of use, there were some wear marks and
imperfections that detracted
from its appearance.
To get a presentable paint job on a fiberglass stock takes a few special “wrinkles”.
The process of adding carbon to the surface of mild steel or iron as a means
of making it harder has been with us for a very long time, at least for a thousand
Brownells Baking Lacquer is available in both Clear, for use on gray-finished
actions and gun parts, and Black, for use on hard-to-blue items such
as cast iron shotgun receivers, forend irons,Winchester Post-1964 Model 94
receivers, aluminum receivers and trigger groups, plus stainless steel parts.
As an embellisher of firearms, I particularly like to use the cosmetic gray
finishes to highlight my work. But, as an active hunter and user of firearms,
and a professional, licensed guide in the State of Wyoming for the most part
of 17 years, I am also very interested in the functional uses of firearms.
1) Polish or bead blast parts to achieve the desired finish.
2) Degrease the parts with Brownells TCE Cleaner°Degreaser, Acetone or Lacquer
thinner. After degreasing, allow part to warm to room temperature before spraying.
Thank you for contacting our Chat Team! Please visit us again.
If you would like a copy of the chat transcript please click "Send Transcript" below.
Hello, to begin a chat session with a customer service representative, complete the fields below and click Chat