Acraglas Liquid Tips
If the resin seems to be crystallized or sugared, it is because of the high purity of the resin. The more pure it is, the more likely it can start to crystallize. So if you have this problem, remove the cap and remove the inner seal, if there is one, and then place the cap back on loosely and don’t screw it on. Place in a microwave and nuke on high for 10 seconds. Take it out and shake it or with a long stick or rod, give it a stir, and then place back in for another 10 seconds, and remove and repeat the shaking/stirring again. The most you should need to go is 3 times, mixing between each time and the resin will be liquid again with the consistency of corn syrup and once you allow it to cool, it will be ready to use. Do not mix the resin and hardener while it is warm.