These Patent Pending hi intensity LED systems put the light right where you need it......inside the cage of your reloading press. Super thin 6 LED profile attaches to the inside of the upright of your press and floods the shellplate and your cases with light. Double checking powder level before setting each bullet is an important safety step and now becomes easier than ever before. I will let the photos speak for themselves. Each 12 volt light system comes with a 4 inch long, 6 LED strip, inline on\off switch and a 110 to 12v adapter. (No more fading batteries) Also comes with 2 self adhesive wire routing anchors and zip ties. Ceiling LED Kit has everything the Standard kit has plus an addition 2" LED strip and "Y" adapter for use on the "ceiling " of the press to flood the shellplate with even more light from above. The Skylight kit features a machined bushing with an embedded 8 LED pod that drops into the center hole of the toolhead. Additionally, the system also has a 4" 6 LED strip that attaches to the inside of the press frame. Super bright, , out of the way, no heat and does the job perfectly. Average lifespan is 75,000 hours. The system comes complete with a 110 plug in adaptor, on\off switch, wire routing anchors and zip ties.
Sinclair, Issue:5A, Page:070