If there is anything in your cart, it will not be brought over to the old site.

L.E. WILSON, INC. NECK SIZING BUSHINGS

Diameter (in)

Brownells #

MFR #

UPC

$17.99

Purchase Limit

Select Items In Stock

NOTIFY ME WHEN IT'S BACK IN STOCK

Can we ship this to you?

How To Buy Guns Online

International purchase information

Specifications

Please select from the options above to see detailed specifications.

Restriction

Please select from the options above to see detailed restrictions.

Can we ship this to you?

How To Buy Guns Online

International purchase information

Description

Hardened stainless steel neck bushing from L.E. Wilson. Wilson makes their bushings in .001” increments. The size marked on them refers to the middle of the bushing, which is reamed with a .003” taper. Since the case neck only reaches the middle, a slightly tighter sizing can be achieved by turning the bushing over, with the markings facing toward the case (markings facing down). This is mainly an emergency step to be taken if the brass has hardened, springing back more, and will no longer hold the bullet; or for fine-tuning the sizing to provide less additional “squeeze” than using the next smaller bushing in the normal way. Made to similar specs to the Redding neck bushings. Will not interchange with Forster or RCBS dies.

Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".

Please select a FFL Dealer

7 dealers near

No dealers found

Please search by another zipcode to find the nearest dealer.

Brownells Retail Store

You must select required check box

Note:

Listed hours & fees are not guaranteed and subject to change. Please contact the dealer to confirm current hours & fees.

* Must accept required fields.

Brownells Featured Dealers

Choosing a Brownells Featured Dealer is the fastest and easiest way to complete your purchase. Brownells Featured Dealers have agreed to perform FFL transfers on guns purchased online from Brownells. We have their necessary FFL information on file and your FFL order will ship directly to them once processed.
Standard Dealers

Standard Dealers have not yet agreed to perform FFL transfers on guns purchased online from Brownells. If you choose a Standard Dealer, you are responsible for contacting that dealer and arranging for the dealer to submit a signed copy of an FFL and to give Brownells permission to ship the gun.
Not Available Dealers

Not Available Dealers are dealers Brownells cannot ship guns to at this time. These dealers either do not meet our requirements for FFL transfers, or prefer to not perform transfers for guns purchased online from Brownells.

7 dealers near

View Suppressors	View AR-15 Parts
View 1911 Parts	View Parts for Glock
View Parts for Ruger 10/22	View Schematics

L.E. WILSON, INC. NECK SIZING BUSHINGS

Add To Favorite

Pin in Brownells Featured Dealers

Pin in Standard Dealers

Pin in Not Available Dealers

Brownells Featured Dealers

Standard Dealers

Not Available Dealers