The Wilson Case Trimmer is the most accurate case trimmer in the world! The unique way the case is held assures your cases are aligned square to the cutter during trimming and that the trimmed length is identical for each case.
The Wilson trimmer uses case holders that hold the case neck by the body taper and utilizes no pilots during the case trimming operation. The trimmer utilizes a rail system that the case holders, cutter housing, and adjustment stop sits on providing perfect alignment with each other. Trimmer case holders are available separately. When trimming cases shorter than 1.3” such as pistol cases, the use of a spacer (part number WX11) is necessary. When trimming cases shorter than 1.3” such as pistol cases, the use of a spacer (part number WX11) is necessary.
The Wilson Case Trimmer is available in several configurations and can also be used for inside neck reaming, military crimp removal, and case mouth deburring by using additional cutters.
Wilson Standard Case Trimmer – Case Trimmer complete (order trimmer case holders separately). Clamp this unit in a bench vise or combine it with our Sinclair Trimmer Stand w/Clamp and purchase the Sinclair/Wilson Trimmer Kit.
Sinclair/Wilson Case Trimmer Kit – Wilson Case Trimmer and Sinclair Mounting Stand with “SharkFin” Case Holder Clamp (order case holders separately.) This mounting stand and clamping attachment make case trimming much quicker and comfortable. The mounting stand can be c-clamped or permanently mounted to a bench top. The “SharkFin” Case Holder Clamp swings quickly into place and provides downward pressure on the case holder while trimming.
Sinclair/Wilson 50 BMG Case Trimmer Kit – This kit includes a Wilson Case Trimmer with a larger diameter cutter than the standard cutter, a Sinclair Mounting Stand with a “Shark Fin” Case Holder Clamp, and a case holder for the 50 BMG. In addition to the 50 BMG, this configuration can also be used with other cartridges down to and including .22 caliber cartridges.
Wilson Stainless Micro Trimmer Only – The Wilson Stainless Micro Trimmer enables the user to easily make quick trim adjustments in .001" increments. The compact micrometer unit is directly incorporated into the stop bearing. Add a trimmer case holder (sold separately) and you can clamp your trimmer in a bench vise or pair the trimmer with a Sinclair Trimmer Stand w/Clamp.
Sinclair, Issue:3A, Page:017
Sinclair, Issue:3A, Page:086