Brownells Brownells Brownells 75th Anniversary - A Shooting Heritage

Grip Bushing Tool

Best Sellers
  1. Ak-47 Grip Screw & Bushing
    Item#:
    100-006-316  
    Our Price:
    $7.99
    Description:
    Steel grip screw and bushing are direct replacements for the original pistol grip parts. Precisely formed and threaded with American quality control, sometimes lacking in foreign factories, for proper fit and function. Makes sense to replace these parts when installing a new grip. Bushing is stamped “TAPCO USA”. Mfg: Tapco Weapons Accessories SPECS: Carbon steel, black oxide finish. 4" (10.1cm) long. Slotted head, M6 x 1mm threads.
  2. 1911 Grip Bushing Staker - Grip Bushing Staker
    Item#:
    080-644-000  
    Our Price:
    $31.99
    Description:
    1911 stock bushings get bunged up or lost in the field or when a pro is doing a "Master Reblue Job" they get removed to permit the finest possible polishing job. Then they have to be replaced and that can be a real chore. No more. With this special Brownells 1911 Auto Grip Bushing Staker, it's now quick and easy to get them tight on the first try. Made in 8 segments with 90° cuts between for maximum bushing contact to frame. Has "handle" and deep hole in top of Staker to prevent your 1/8" punch from slipping off. (The 1/8" punch passes thru bushing center on opposite side of frame to give clean access to bushing being replaced or tightened.) Note: Mak Mfg: Brownells SPECS: Staker head - S5 Tool Steel with Rc 57-60 hardening. 4" (10.2cm) handle.
  3. 1911 Grip Bushing Staker - Replacement Staker Head
    Item#:
    080-644-001  
    Our Price:
    $24.99
    Description:
    1911 stock bushings get bunged up or lost in the field or when a pro is doing a "Master Reblue Job" they get removed to permit the finest possible polishing job. Then they have to be replaced and that can be a real chore. No more. With this special Brownells 1911 Auto Grip Bushing Staker, it's now quick and easy to get them tight on the first try. Made in 8 segments with 90° cuts between for maximum bushing contact to frame. Has "handle" and deep hole in top of Staker to prevent your 1/8" punch from slipping off. (The 1/8" punch passes thru bushing center on opposite side of frame to give clean access to bushing being replaced or tightened.) Note: Mak Mfg: Brownells SPECS: Staker head - S5 Tool Steel with Rc 57-60 hardening. 4" (10.2cm) handle.
  4. 1911 Grip Bushing Extractor - 1911 Grip Bushing Extractor, Slim
    Item#:
    100-017-842  
    Our Price:
    $24.99
    Description:
    Challis bushing extractors are attached to the bushing with a standard grip screw. With the bushing held captive, the drive teeth cannot slip out of engagement and the top of the bushing will not peel off. Significant torque can be applied with the included lever.   Mfg: Challis Grips SPECS: For removal of standard size or slim 1911 grip bushings.
  5. 1911 Grip Bushing Extractor - 1911 Grip Bushing Extractor, Standard
    Item#:
    100-017-841  
    Our Price:
    $24.99
    Description:
    Challis bushing extractors are attached to the bushing with a standard grip screw. With the bushing held captive, the drive teeth cannot slip out of engagement and the top of the bushing will not peel off. Significant torque can be applied with the included lever.   Mfg: Challis Grips SPECS: For removal of standard size or slim 1911 grip bushings.
  6. 1911 Grip Bushing Staker - 15/64" .2344"
    Item#:
    891-215-640  
    Our Price:
    $3.99
    Description:
    1911 stock bushings get bunged up or lost in the field or when a pro is doing a "Master Reblue Job" they get removed to permit the finest possible polishing job. Then they have to be replaced and that can be a real chore. No more. With this special Brownells 1911 Auto Grip Bushing Staker, it's now quick and easy to get them tight on the first try. Made in 8 segments with 90° cuts between for maximum bushing contact to frame. Has "handle" and deep hole in top of Staker to prevent your 1/8" punch from slipping off. (The 1/8" punch passes thru bushing center on opposite side of frame to give clean access to bushing being replaced or tightened.) Note: Mak Mfg: Brownells SPECS: Staker head - S5 Tool Steel with Rc 57-60 hardening. 4" (10.2cm) handle.

View All Grip Bushing Tool »

grip bushing tool & Accessories

Related Items
  1. Bushing, Grip, 92/96 Stock & Combat
    Item#:
    913-100-511  
    Our Price:
    $3.99
    Description:
    BUSHING, GRIP, 92/96 STOCK & COMBAT Mfg: Beretta Usa
  2. Grip Screw & Bushing O-Rings - 1911 Hex Drive Grip Bushing O-Rings, 4 Pack
    Item#:
    100-016-951  
    Our Price:
    $1.99
    Description:
    These custom O-rings are for use only with Challis hex drive bushings. As the grip screws are tightened, the O-ring is forced down a conical seat and outward against the counterbore in the bottom of the grip. When the grip is fully seated, the compressed O-ring holds the grip firmly in place and isolates it from the bushing. Use of O-rings will reduce scuffing of the frame by G10 and other abrasive grips, protect fragile and expensive grips such as ivory and mammoth tooth, and minimize loosening of bushings caused by heavy grip materials such as G10, carbon fiber and aluminum. The custom size Challis grip screw O-rings provide additional shock absorption and prevent grip screws from b Mfg: Challis Grips
  3. Grip Screw & Bushing O-Rings - 1911 Hex Drive Grip Bushing O-Rings, 24 Pack
    Item#:
    100-016-952  
    Our Price:
    $9.99
    Description:
    These custom O-rings are for use only with Challis hex drive bushings. As the grip screws are tightened, the O-ring is forced down a conical seat and outward against the counterbore in the bottom of the grip. When the grip is fully seated, the compressed O-ring holds the grip firmly in place and isolates it from the bushing. Use of O-rings will reduce scuffing of the frame by G10 and other abrasive grips, protect fragile and expensive grips such as ivory and mammoth tooth, and minimize loosening of bushings caused by heavy grip materials such as G10, carbon fiber and aluminum. The custom size Challis grip screw O-rings provide additional shock absorption and prevent grip screws from b Mfg: Challis Grips
  4. 1911 Grip Screw Bushing - 1911 Grip Screw Bushing, Stainless
    Item#:
    965-000-208  
    Our Price:
    $6.99
    Description:
    Standard thickness grip screw bushings are a direct replacement for one that is damaged or stripped during use. Note: Most factory installed bushings require removal of rear staking for new bushing installation. Re-staking or loctite 271 are acceptable ways to secure your new bushing in the frame. Sold as a set of 4. Mfg: Wilson Combat
  5. 1911 Grip Screw Bushing - 1911 Grip Screw Bushing, Blue
    Item#:
    965-000-207  
    Our Price:
    $6.99
    Description:
    Standard thickness grip screw bushings are a direct replacement for one that is damaged or stripped during use. Note: Most factory installed bushings require removal of rear staking for new bushing installation. Re-staking or loctite 271 are acceptable ways to secure your new bushing in the frame. Sold as a set of 4. Mfg: Wilson Combat
  6. Grip Screw & Bushing O-Rings - 1911 Grip Screw O-Rings, 24 Pack
    Item#:
    100-016-950  
    Our Price:
    $9.99
    Description:
    These custom O-rings are for use only with Challis hex drive bushings. As the grip screws are tightened, the O-ring is forced down a conical seat and outward against the counterbore in the bottom of the grip. When the grip is fully seated, the compressed O-ring holds the grip firmly in place and isolates it from the bushing. Use of O-rings will reduce scuffing of the frame by G10 and other abrasive grips, protect fragile and expensive grips such as ivory and mammoth tooth, and minimize loosening of bushings caused by heavy grip materials such as G10, carbon fiber and aluminum. The custom size Challis grip screw O-rings provide additional shock absorption and prevent grip screws from b Mfg: Challis Grips

Ammunition
  1. Tap Ammunition - Hornady Tap Fpd 308 Win 155 Gr 20/Box
    Item#:
    749-009-487  
    Our Price:
    $33.79
    Description:
    Accurate, Deadly Dependable ammunition is required to protect the safety and security of your family. TAP FPD ammunition features top-performing Hornady bullets that are trusted to deliver the terminal performance required by law enforcement and the military. Nickel-plated cases eliminate the potential for corrosion, and improve feeding in all firearms. Special propellants are used to reduce muzzle flash that save your night vision during nighttime engagements. Primers are chosen to match each powder and load, and to quickly and reliably ignite the powder charge.RifleAccurate and consistent, TAP FPD rifle ammunition offers enhanced terminal performance, rapid expansion and fragmentatio Mfg: Hornady
  2. Fmj Ammunition - Fmj Ammo 6.5x55mm Swede 100gr 20/Box
    Item#:
    749-015-397  
    Our Price:
    $33.99
    Description:
    Lapua ammunition is known by shooters all over the world. They are please to partner with the world’s top shooters, and to be an example copied by other manufacturers. Lapua’s extremely accurate target shooting cartridges are loaded with the best target bullets. Numerous world championships, Olympic championships and other top competition gold medals, as well as many official world records in different disciplines are shot with the Lapua cartridges. Whether you require bullets for training, competitions, or serious hunting situations you can really trust the performance of Lapua's FMJ bullet family. Reliability means that every shot you fire will hit the target. Mfg: Lapua
  3. Fmj Ammunition - Fmj Ammo 7.62x39mm 123gr 30/Box
    Item#:
    749-015-406  
    Our Price:
    $41.29
    Description:
    Lapua ammunition is known by shooters all over the world. They are please to partner with the world’s top shooters, and to be an example copied by other manufacturers. Lapua’s extremely accurate target shooting cartridges are loaded with the best target bullets. Numerous world championships, Olympic championships and other top competition gold medals, as well as many official world records in different disciplines are shot with the Lapua cartridges. Whether you require bullets for training, competitions, or serious hunting situations you can really trust the performance of Lapua's FMJ bullet family. Reliability means that every shot you fire will hit the target. Mfg: Lapua
  4. Tac Rifle Ammo - Tac Ammo .308 Win 150gr Fmj 20/Box
    Item#:
    105-000-547  
    Our Price:
    $21.99
    Description:
    Loaded with FMJ boat tails, Norma TAC-223 & TAC-308 offers accurate, flat shooting trajectory with the quality and precision Norma is known for. Mfg: Norma
  5. Match Rifle Ammo - Match Ammo .308 Win 168gr Matchking Hpbt 20/Box
    Item#:
    105-000-508  
    Our Price:
    $23.99
    List Price: $29.99
    Description:
    Loaded with Sierra MatchKing HPBT's, Norma MATCH-223 & MATCH-308 offers accurate, flat shooting trajectory with the quality and precision Norma is known for. Mfg: Norma
  6. Match Rifle Ammo - Match Ammo .308 Win 168gr Matchking Hpbt 200/Case
    Item#:
    105-000-509  
    Our Price:
    $239.99
    List Price: $279.99
    Description:
    Loaded with Sierra MatchKing HPBT's, Norma MATCH-223 & MATCH-308 offers accurate, flat shooting trajectory with the quality and precision Norma is known for. Mfg: Norma

View All Ammunition »

Shopping for Grip Bushing Tool? Brownells.com carries the best selection at the lowest prices around. Ranging in price from $1.54 to $129.99, our assortment of 335 Grip Bushing Tool and Grip Bushing Tool & Accessories features all the top choices available. Our excellent selection of gun parts and gunsmith tools, along with our unwavering commitment to the best prices and customer service, has made us the number one online retailer in the industry. We know you'll be happy with your purchase of Grip Bushing Tool from Brownells.com. We stand behind every product we sell, and we're proud to prove it with our 100% satisfaction guarantee - if you're not completely happy with your purchase, let us know right away. It's easy to browse our complete selection of Grip Bushing Tool. When you find what you're looking for, place an order online or call us at 1-800-741-0015. Our knowledgeable staff is always here to help meet all your gun parts and gunsmith needs, so never hesitate to ask a question. By email, by phone, or by smoke signal - we're here to help you aim true.