Brownells Brownells Brownells 75th Anniversary - A Shooting Heritage

Glock Sight Tool

Best Sellers
  1. Sight Installation Tool For Glock®
    Item#:
    892-103-102  
    Our Price:
    $139.99
    Description:
    Specifically designed to install, adjust and remove all models of Trijicon Glock Sights without damage. Includes heavy-duty rear sight mover with oilite bushings that allow for very fine windage adjustments, and a front sight nut driver that fits all models of aftermarket front sights. Mfg: Trijicon SPECS: Aluminum, anodized finish. 3⁄16" nut driver.
  2. Front Sight  Tool For Glock® - Glock Front Sight Tool
    Item#:
    638-000-188  
    Our Price:
    $11.99
    Description:
    Installs and removes HiViz front sights for Glock pistols. Large, hex-shaped grasping surface gives you a secure purchase and plenty of leverage. Also fits Walther P99, Smith &Wesson SW99, and other pistols with sights that use 3⁄16" hex head screws. Mfg: Hiviz SPECS: Aluminum, anodized finish. Fits 3⁄16" hex head screws.
  3. Front Sight Tool For Glock® - Front Sight Tool For Glock
    Item#:
    087-017-001  
    Our Price:
    $19.95
    Description:
    Fits the small, hex head screw that holds Glock aftermarket sights in place. Makes installing replacement sights or removing sights for maintenance easier with less chance of damage. Hex shank fits Magna-Tip® screwdrivers. Not for use with 6" slides. Mfg: Ed Brown SPECS: Steel.
  4. Sight Pro - Glock Slide Shoe (Except Glock 42)
    Item#:
    584-000-007  
    Our Price:
    $17.99
    Description:
    Main Sight Tool- A must have for Gunsmiths and Armorers.  The Sight Pro uses a unique clamping shoe design, plus 4 slide support pads and a white nylon spacer block to lock the slide in place while adjusting or replacing sights.  Two cuts on the lower section of the tool allow you to lock it in a bench vise. Degree Block Assembly- Made for Glock and HK angled sight, this 30 degree block assembly allows you to easily adjust or replace the angled sights, preventing marring or damage that might occur if you used the straight wall press. Slide Shoe- Unique clamping shoes are firearm specific.  These work with the MGW Sight Pro. Square Block Assembly- Square Block As Mfg: Mgw
  5. Glock Front Sight Tool (Hex)
    Item#:
    100-700-117  
    Our Price:
    $34.99
    Description:
    GLOCK Front Sight Tool (HEX) Mfg: Glock
  6. Front Sight Tool For Glock® - Front Sight Tool For Glocks
    Item#:
    080-001-092  
    Our Price:
    $7.99
    Description:
    Brownells front sight tool for Glocks fits the hex screw found on aftermarket front sights.  Fits the opening found on longslide Glocks as well. Mfg: Brownells SPECS: Steel, 0.125" O.D., 1.63" Length.

View All Glock Sight Tool »

Glock Parts

Related Items
  1. Barrels For Glock® - 40s&W 3.46"(8.8cm) For Glock® 27
    Item#:
    842-000-037  
    Our Price:
    $151.99
    Description:
    Machined, 416 stainless steel barrels are held to tolerances of .001" to ensure maximum accuracy and a precision fit. Features cut-broach rifling with 1-16 twist that’s great for cast bullets. May require minor fitting. All barrels are chambered for full case support Mfg: Storm Lake SPECS: 416 Stainless steel, matte finish. Rc 40-42. Glock 17, 19, 34, 22, 23, and 21 Barrels available with Black Isonite QPQ finish
  2. Barrels For Glock® - 40s&W 4.02"(10.2cm) For Glock® 23
    Item#:
    842-000-033  
    Our Price:
    $151.99
    Description:
    Machined, 416 stainless steel barrels are held to tolerances of .001" to ensure maximum accuracy and a precision fit. Features cut-broach rifling with 1-16 twist that’s great for cast bullets. May require minor fitting. All barrels are chambered for full case support Mfg: Storm Lake SPECS: 416 Stainless steel, matte finish. Rc 40-42. Glock 17, 19, 34, 22, 23, and 21 Barrels available with Black Isonite QPQ finish
  3. Barrels For Glock® - 9mm 4.02"(10.2cm) For Glock® 19
    Item#:
    842-000-034  
    Our Price:
    $151.99
    Description:
    Machined, 416 stainless steel barrels are held to tolerances of .001" to ensure maximum accuracy and a precision fit. Features cut-broach rifling with 1-16 twist that’s great for cast bullets. May require minor fitting. All barrels are chambered for full case support Mfg: Storm Lake SPECS: 416 Stainless steel, matte finish. Rc 40-42. Glock 17, 19, 34, 22, 23, and 21 Barrels available with Black Isonite QPQ finish
  4. Barrels For Glock® - 9mm 4.49"(11.4cm) For Glock® 17
    Item#:
    842-000-003  
    Our Price:
    $148.99
    Description:
    Machined, 416 stainless steel barrels are held to tolerances of .001" to ensure maximum accuracy and a precision fit. Features cut-broach rifling with 1-16 twist that’s great for cast bullets. May require minor fitting. All barrels are chambered for full case support Mfg: Storm Lake SPECS: 416 Stainless steel, matte finish. Rc 40-42. Glock 17, 19, 34, 22, 23, and 21 Barrels available with Black Isonite QPQ finish
  5. Barrels For Glock® - 9mm 5.32"(13.5cm) For Glock® 34
    Item#:
    842-000-007  
    Our Price:
    $151.99
    Description:
    Machined, 416 stainless steel barrels are held to tolerances of .001" to ensure maximum accuracy and a precision fit. Features cut-broach rifling with 1-16 twist that’s great for cast bullets. May require minor fitting. All barrels are chambered for full case support Mfg: Storm Lake SPECS: 416 Stainless steel, matte finish. Rc 40-42. Glock 17, 19, 34, 22, 23, and 21 Barrels available with Black Isonite QPQ finish
  6. Barrels For Glock® - 40s&W 6.02"(15.3cm) For Glock® 24
    Item#:
    842-000-006  
    Our Price:
    $151.99
    Description:
    Machined, 416 stainless steel barrels are held to tolerances of .001" to ensure maximum accuracy and a precision fit. Features cut-broach rifling with 1-16 twist that’s great for cast bullets. May require minor fitting. All barrels are chambered for full case support Mfg: Storm Lake SPECS: 416 Stainless steel, matte finish. Rc 40-42. Glock 17, 19, 34, 22, 23, and 21 Barrels available with Black Isonite QPQ finish

View All Glock Parts »


Glock Ammo
  1. R.I.P Rifle Ammo - 300 Acc Trident Subsonic 200gr. R.I.P. Bullet 20/Box
    Item#:
    105-000-427  
    Our Price:
    $50.60
    Description:
    G2 RIP ammunition is precision machined from solid copper. Each bullet fragments into trocars which create additional wound channels. The resulting shock wave and wound path is maximized, the result is devastating. Mfg: G2 Research
  2. R.I.P Rifle Ammo - 300 Acc Subsonic 200gr. R.I.P. Bullet 20/Box
    Item#:
    105-000-426  
    Our Price:
    $46.60
    Description:
    G2 RIP ammunition is precision machined from solid copper. Each bullet fragments into trocars which create additional wound channels. The resulting shock wave and wound path is maximized, the result is devastating. Mfg: G2 Research
  3. R.I.P Handgun Ammo - 357 Sig 92gr R.I.P Bullet 20/Box
    Item#:
    105-000-424  
    Our Price:
    $50.00
    Description:
    G2 RIP ammunition is precision machined from solid copper. Each bullet fragments into trocars which create additional wound channels. The resulting shock wave and wound path is maximized, the result is devastating. Mfg: G2 Research
  4. R.I.P Rifle Ammo - 300 Acc Supersonic 110gr. R.I.P. Bullet 20/Box
    Item#:
    105-000-425  
    Our Price:
    $46.60
    Description:
    G2 RIP ammunition is precision machined from solid copper. Each bullet fragments into trocars which create additional wound channels. The resulting shock wave and wound path is maximized, the result is devastating. Mfg: G2 Research
  5. R.I.P Handgun Ammo - 380 Acp 62gr. R.I.P. Bullet 20/Box
    Item#:
    105-000-421  
    Our Price:
    $43.80
    Description:
    G2 RIP ammunition is precision machined from solid copper. Each bullet fragments into trocars which create additional wound channels. The resulting shock wave and wound path is maximized, the result is devastating. Mfg: G2 Research
  6. Win 1911 Ammunition - Win 1911 .45 Acp 230gr Fmj 50/Box
    Item#:
    105-000-437  
    Our Price:
    $27.99
    Description:
    Offering performance and reliability specifically designed for use in 1911 firearms, Win1911 provides a choice of personal defense or training ammunition that has been matched for ballistic performance and engineered for the same feel and function. Nickel-Plated Bullet Ballistically Matched Sure Functioning Mfg: Winchester

View All Glock Ammo »

Shopping for Glock Sight Tool? Brownells.com is your source for the best prices and widest selection anywhere. Our assortment of 41 Glock Sight Tool and Glock Parts represents the top choices online, ranging in price from $7.99 to $329.99. As the number one online retailer of gun parts and gunsmith tools we are able to provide excellent customer service, great prices, and top quality merchandise, every day. We stand behind every item we sell, because we work with guns, too. We're happy to offer a 100% satisfaction guarantee - if you're not completely satisfied with your purchase, we'll make it right. So, browse our wide selection of Glock Sight Tool - we know you'll find what you're looking for. When you're ready to place an order, use our easy checkout or give us a call. Brownells.com is dedicated to helping you find the gun parts and gunsmith tools you need, so don't hesitate to drop us a line if you have any questions.