Brownells Brownells Brownells 75th Anniversary - A Shooting Heritage

Custom 1911 Parts

Best Sellers
  1. 1911 Hammer - 1911 Hammer, Ss
    Item#:
    100-007-587  
    Our Price:
    $69.99
    Description:
    Match-grade hammer is machined from solid tool steel bar stock, then hardened to hold precise dimensions and stand up to many thousands of rounds without wear. Hammer was designed exclusively for Nighthawk by noted 1911 ’smith Bob Marvel, with precision-cut hooks and pin hole to ensure a correct fit. A large, oval cutout in the spur keep weight to a minimum, and crisp serrations prevent slippage when cocking or uncocking. Engagement surface is ready for final grinding and polishing to ensure a clean, reliable letoff. Gunsmith fitting required for proper function and safety. Mfg: Nighthawk Custom SPECS: Hammer- Hardened tool steel, heat treated to Rc 50-53, black matte oxide finish. Also available in stainless steel, natural finish.
  2. 1911 Slide - C/M .45 Acp G/Bo-Mar/Dbl Slide
    Item#:
    124-055-451  
    Our Price:
    $379.99
    Description:
    Slides come standard with lowered ejection port, surface-ground flats and bead-blasted rounds. Available with rear only (R) or front and rear (DBL) serrations, and with or without (NS) sight cuts. The front sight cut accepts 65° x .330'''', dovetail front sights. Pre-machined rear sight cuts will accept the Bo-Mar (Bo-Mar) BMCS with hidden leaf cuts or the Novak (Novak) Low Mount Combat Sight (.495'''') dovetail. Lengths listed in specs are nominal barrel lengths the slides will accept. Mfg: Les Baer Custom SPECS: Chrome-moly steel, in-the-white (CM) or stainless steel (S/S). .38 Super or .45 ACP breech face. Long, (L) 6'''', Government (G) 5'''', Commanche (Cmch) 4-¼''''. ALL Models require a .38 Super/9mm firing pin.
  3. 1911 Hammer - 1911 Hammer, Blued
    Item#:
    100-003-268  
    Our Price:
    $60.99
    Description:
    Match-grade hammer is machined from solid tool steel bar stock, then hardened to hold precise dimensions and stand up to many thousands of rounds without wear. Hammer was designed exclusively for Nighthawk by noted 1911 ’smith Bob Marvel, with precision-cut hooks and pin hole to ensure a correct fit. A large, oval cutout in the spur keep weight to a minimum, and crisp serrations prevent slippage when cocking or uncocking. Engagement surface is ready for final grinding and polishing to ensure a clean, reliable letoff. Gunsmith fitting required for proper function and safety. Mfg: Nighthawk Custom SPECS: Hammer- Hardened tool steel, heat treated to Rc 50-53, black matte oxide finish. Also available in stainless steel, natural finish.
  4. 1911 Slide - C/M .38s G/Bo-Mar/Dbl Slide
    Item#:
    124-055-381  
    Our Price:
    $379.99
    Description:
    Slides come standard with lowered ejection port, surface-ground flats and bead-blasted rounds. Available with rear only (R) or front and rear (DBL) serrations, and with or without (NS) sight cuts. The front sight cut accepts 65° x .330'''', dovetail front sights. Pre-machined rear sight cuts will accept the Bo-Mar (Bo-Mar) BMCS with hidden leaf cuts or the Novak (Novak) Low Mount Combat Sight (.495'''') dovetail. Lengths listed in specs are nominal barrel lengths the slides will accept. Mfg: Les Baer Custom SPECS: Chrome-moly steel, in-the-white (CM) or stainless steel (S/S). .38 Super or .45 ACP breech face. Long, (L) 6'''', Government (G) 5'''', Commanche (Cmch) 4-¼''''. ALL Models require a .38 Super/9mm firing pin.
  5. 1911 Firing Pin & Stop - .45 Acp Firing Pin
    Item#:
    100-003-255  
    Our Price:
    $13.99
    Description:
    Firing Pin is machined to exact tolerances from stainless steel for a tight, precise fit to prevent primer flow. Separate models for .45 ACP and 9mm/.38 Super, so you can get the correct weight and size to ensure reliable ignition in your gun with a variety of primers. Firing Pin Stop is machined slightly oversized from solid carbon steel bar stock, allowing for custom fitting to get a solid, exact fit that keeps the extractor properly positioned for reliable extraction and feeding. Radiused edges help prevent stress cracking. Mfg: Nighthawk Custom SPECS: Firing Pin – Stainless steel. Models for .45 ACP and 9mm/.38 Super. Firing Pin Stop – Steel, blued. Fits all calibers.
  6. 1911 Firing Pin & Stop - Firing Pin Stop
    Item#:
    100-003-257  
    Our Price:
    $18.99
    Description:
    Firing Pin is machined to exact tolerances from stainless steel for a tight, precise fit to prevent primer flow. Separate models for .45 ACP and 9mm/.38 Super, so you can get the correct weight and size to ensure reliable ignition in your gun with a variety of primers. Firing Pin Stop is machined slightly oversized from solid carbon steel bar stock, allowing for custom fitting to get a solid, exact fit that keeps the extractor properly positioned for reliable extraction and feeding. Radiused edges help prevent stress cracking. Mfg: Nighthawk Custom SPECS: Firing Pin – Stainless steel. Models for .45 ACP and 9mm/.38 Super. Firing Pin Stop – Steel, blued. Fits all calibers.

View All Custom 1911 Parts »

custom 1911 parts & Accessories

Related Items
  1. 1911 Extended Ejector - 10mm/.40 Extended Ejector
    Item#:
    100-007-586  
    Our Price:
    $32.99
    Description:
    Heavy-duty ejector has an extended nose to ensure solid contact that consistently boots the spent case clear of the ejection port. Helps prevent jamming, smokestacking, and other ejection-related problems that compromise reliability. Machined from solid bar stock then hardened before bluing, so it’ll stand up to a pounding. Part may need minor fitting; does not require modifications to frame. Mfg: Nighthawk Custom SPECS: Carbon steel, blued. Fits 1911 Auto. Separate, caliber-specific models for .45 ACP, 9mm/.38 Super (also fits .40 S&W), and 10mm/.40 S&W.
  2. 1911 Extended Ejector - 9mm/.38/.40 Extended Ejector
    Item#:
    100-003-246  
    Our Price:
    $32.99
    Description:
    Heavy-duty ejector has an extended nose to ensure solid contact that consistently boots the spent case clear of the ejection port. Helps prevent jamming, smokestacking, and other ejection-related problems that compromise reliability. Machined from solid bar stock then hardened before bluing, so it’ll stand up to a pounding. Part may need minor fitting; does not require modifications to frame. Mfg: Nighthawk Custom SPECS: Carbon steel, blued. Fits 1911 Auto. Separate, caliber-specific models for .45 ACP, 9mm/.38 Super (also fits .40 S&W), and 10mm/.40 S&W.
  3. 1911 .460r Conversion Kit
    Item#:
    181-100-460  
    Our Price:
    $295.99
    Description:
    Button rifled, drop-in barrel chambered for the .460 Rowland cartridge, turns the 1911 into a high performance, hunting pistol. Fitted with a match grade bushing that fits most slides tightly for excellent accuracy. Dual port comp controls recoil and muzzle flip. Includes Wolff 24 lb. recoil spring, extra power firing pin spring, full-length guide rod and recoil plug. Mfg: Clark Custom SPECS: Barrel- Stainless steel 5 1/2" (14cm) long, Threaded .580"-40 tpi. Increases pistol length by 1 1/2"(3cm). May require minor fitting. Uses standard .45 ACP magazines. NOTE: May not fit all frames and slides. Factory recommends installation only on Colt, Kimber, Springfield A
  4. 1911 Firing Pin & Stop - 9mm/.38 Super Firing Pin
    Item#:
    100-003-256  
    Our Price:
    $13.99
    Description:
    Firing Pin is machined to exact tolerances from stainless steel for a tight, precise fit to prevent primer flow. Separate models for .45 ACP and 9mm/.38 Super, so you can get the correct weight and size to ensure reliable ignition in your gun with a variety of primers. Firing Pin Stop is machined slightly oversized from solid carbon steel bar stock, allowing for custom fitting to get a solid, exact fit that keeps the extractor properly positioned for reliable extraction and feeding. Radiused edges help prevent stress cracking. Mfg: Nighthawk Custom SPECS: Firing Pin – Stainless steel. Models for .45 ACP and 9mm/.38 Super. Firing Pin Stop – Steel, blued. Fits all calibers.
  5. 1911 Bar Stock Disconnector - Bar Stock Disconnector
    Item#:
    100-003-261  
    Our Price:
    $21.99
    Description:
    Robust, match grade replacement for your pistol’s factory disconnector has precision ground engagement surfaces to ensure an exceptionally crisp trigger without creep or mushiness. Fully machined from solid bar stock, not cast, and all of the engagement surfaces are polished. Mfg: Nighthawk Custom SPECS: Hardened steel. In the white. Gunsmith fitting required.
  6. 1911 Mainspring Housing - Blue Mainspring Housing
    Item#:
    124-153-100  
    Our Price:
    $38.99
    Description:
    Puts an end to the unsightly gap bet- ween the mainspring housing and the frame. These are the same flat, serrated housings Les uses on his own custom 1911 Auto pistols. Cast oversized, then finish machined for a tight, gap-free fit on all commercially-available 1911 Auto frames. Mfg: Les Baer Custom SPECS: Steel, blued or stainless steel, matte finish.

View All Custom 1911 Parts & Accessories »


Ammunition
  1. Custom Ammo 300 Weatherby Magnum 180gr Gmx - 300 Weatherby Magnum 180gr Gmx 20/Box
    Item#:
    749-016-345  
    Our Price:
    $55.99
    Description:
    CUSTOM AMMO 300 WEATHERBY MAGNUM 180GR GMX Mfg: Hornady
  2. Custom Ammo 41 Remington Magnum 210gr Xtp - 41 Magnum 210gr Xtp 20/Box
    Item#:
    749-016-761  
    Our Price:
    $19.99
    Description:
    All Hornady Custom pistol ammo is loaded with either the famous Hornady XTP (Extreme Terminal Performance) bullet, their FMJ or their FTX bullet. All are supremely accurate, and deliver maximum knockdown power. Hornady produces most of the brass for Hornady Custom pistol ammo. All other brass is chosen to ensure it meets our unusually high standards for reliable feeding, corrosion resistance, proper hardness and the ability to withstand maximum chamber pressures. Each cartridge is loaded to ensure optimal pressure, velocity and consistency from lot to lot. Like the powder, each primer is carefully matched to individual loads, and specifically selected for their ability to quickly, complet Mfg: Hornady
  3. Custom Ammo 250 Savage 100gr Interlock - 250 Savage 100gr Interlock 20/Box
    Item#:
    749-016-754  
    Our Price:
    $31.99
    Description:
    Millions of successful hunts have proven the accuracy and deadly knockdown power of the famous Hornady bullets loaded into every Hornady Custom rifle cartridge. Each cartridge is loaded to ensure optimal pressure, velocity and consistency, from lot to lot. Much of the brass is made by Hornady, the rest carefully selected for reliable feeding, corrosion resistance, hardness and the ability to withstand maximum chamber pressure. Like the powder, each primer is carefully matched to individual loads, and specially selected for their ability to quickly, completely and reliably ignite the powder charge. Mfg: Hornady
  4. Custom Ammo 264 Winchester Magnum 140gr Interlock - 264 Winchester Magnum 140gr Interlock 20/Box
    Item#:
    749-016-755  
    Our Price:
    $39.99
    Description:
    Millions of successful hunts have proven the accuracy and deadly knockdown power of the famous Hornady bullets loaded into every Hornady Custom rifle cartridge. Each cartridge is loaded to ensure optimal pressure, velocity and consistency, from lot to lot. Much of the brass is made by Hornady, the rest carefully selected for reliable feeding, corrosion resistance, hardness and the ability to withstand maximum chamber pressure. Like the powder, each primer is carefully matched to individual loads, and specially selected for their ability to quickly, completely and reliably ignite the powder charge. Mfg: Hornady
  5. Win 1911 Ammo 45 Acp 230gr Fmj - Win 1911 .45 Acp 230gr Fmj 500/Case
    Item#:
    105-000-439  
    Our Price:
    $251.99
    Description:
    Offering performance and reliability specifically designed for use in 1911 firearms, Win1911 provides a choice of personal defense or training ammunition that has been matched for ballistic performance and engineered for the same feel and function. Nickel-Plated Bullet Ballistically Matched Sure Functioning Mfg: Winchester
  6. Win 1911 Ammo 45 Acp 230gr Fmj - 45 Acp 230gr Full Metal Jacket 50/Box
    Item#:
    105-000-437  
    Our Price:
    $26.79
    Description:
    Offering performance and reliability specifically designed for use in 1911 firearms, Win1911 provides a choice of personal defense or training ammunition that has been matched for ballistic performance and engineered for the same feel and function. Nickel-Plated Bullet Ballistically Matched Sure Functioning Mfg: Winchester

View All Ammunition »

Searching for Custom 1911 Parts? Look no further than Brownells.com for the best prices and selection. Ranging in price from $4.99 to $549.99, our assortment of 106 Custom 1911 Parts and Custom 1911 Parts & Accessories features all the top choices available. We're the number one online retailer of gun parts and gunsmith tools. Our success and dedication allows us to provide you with the best products, lowest prices, and excellent customer service every time. We love the products we sell, and we know you will, too. We provide a 100% satisfaction guarantee with all of our products, so if you're not satisfied with your Custom 1911 Parts for any reason, let us know right away. It's easy to browse our complete selection of Custom 1911 Parts. When you find what you're looking for, place an order online or call us at 1-800-741-0015. Customer service associates are standing by to answer your questions about our gun parts and gunsmith tools. We're here to help!