Brownells Brownells Brownells 75th Anniversary - A Shooting Heritage

Checkering Tools

Best Sellers
  1. No. 131 Checkering Riffler - Checkering Riffler
    Item#:
    360-318-971  
    Our Price:
    $32.99
    Description:
    Checkering Rifflers are used by many professional checkerers and stockmakers instead of bent needle files for pointing-up checkering, cleaning up damaged or old checkering, and border work. The No. 131 we recommend and carry has a full 3-square shape, cutting a perfect 60° angle. File teeth meet exactly square on corners, will cut finest hairline cut at bottom of diamond grooves. Has approximately 35° up-bend at tip. Exceedingly nice to work with. Mfg: Grobet File Co. Of America Inc SPECS: 6" (12.7cm) long. "V" is 60°. Approx. 1" (2.5cm) edge.
  2. Checkering Gauge
    Item#:
    241-000-001  
    Our Price:
    $6.99
    Description:
    Easy-to-use template identifies checkering spacings from 16 to 32 lines-per-inch. Place over pattern to be measured and match the lines on the proper scale. Oblique diamond shape helps provide accurate determination of layout lines. Mfg: Dem-Bart SPECS: 9'''' (22.9cm) x 2¾'''' (7cm).
  3. Checkering Wheel - 90 Deg, .062" Carbide Checkering Wheel
    Item#:
    100-017-453  
    Our Price:
    $125.00
    Description:
    The carbide checkering wheel is used for checkering gun stocks and metal.  This replacement wheel is for use with power checkering systems. Mfg: Ullman Precision
  4. Checkering Cradle
    Item#:
    080-026-000  
    Our Price:
    $87.99
    Description:
    Locks All Stocks In Best Position For No Strain Layout & Checkering
  5. Camp Perry Checkering Set - Checker's Rule
    Item#:
    364-004-000  
    Our Price:
    $3.99
    Description:
    Do any checkering job from layout to finish, simple to complex patterns, in all woods. Six complete tools; Offset and Standard handles with the proper cutters and accessories to ensure success. Mfg: Gunline SPECS: Includes: 2-Edge Spacer, 3-Edge Spacer, Border-Vex, V-Edger, Pointer-Long, Veiner, Checkerer’s Rule, Layout Gauge, Patterns and Illustrated Instructions. 60° spacers, 90° cutters.
  6. Type 3 Checkering Tool - Doiron Type 3 90 Degree 3/16 Pull Checkering Tool
    Item#:
    100-017-457  
    Our Price:
    $42.00
    Description:
    The Type 3 is available as a push or pull in 90 degrees, with a 3/16 inch cutter. It is used for reaching tight spots and works well at bringing the diamonds to point in hard to reach areas. It also does a fantastic job at cutting radii in borders. Mfg: Ullman Precision

View All Checkering Tools »

Checkering Tools Master Set

Related Items
  1. Type 1 Checkering Tool - Doiron Type 1 90 Degree Push Checkering Tool
    Item#:
    100-017-454  
    Our Price:
    $58.00
    Description:
    The Type 1 has a 5/8 inch cutter, and is available in push and pull and in 90 degrees. Its length is fantastic for layout and straightening lines, while its ability to track allows it to create straight, precise, and crisp lines. Mfg: Ullman Precision
  2. Type 4 Checkering Cutter - Type 4 90 Degree Push Checkering Tool
    Item#:
    100-017-590  
    Our Price:
    $50.00
    Description:
    The Type 4 has a 3/8 inch cutter, and is available in push or pull in 90 degrees. The medium length cutter works well at straightening lines in hard to reach spots, and tracks well over convex surfaces, giving you straight lines that run true. Material: Carbide. Mfg: Ullman Precision
  3. Type 4 Checkering Cutter - Type 4 90 Degree Pull Checkering Tool
    Item#:
    100-017-591  
    Our Price:
    $50.00
    Description:
    The Type 4 has a 3/8 inch cutter, and is available in push or pull in 90 degrees. The medium length cutter works well at straightening lines in hard to reach spots, and tracks well over convex surfaces, giving you straight lines that run true. Material: Carbide. Mfg: Ullman Precision
  4. Checkering
    Item#:
    070-000-001  
    Our Price:
    $34.99
    Description:
    S. L. Mays. 175 pages. 8½" x 11".  Softcover. Over 250 color photographs. Concise, easy-to-follow guide provides the beginner with start-to-finish, step-by-step instructions through the process of checkering a wood stock. From choosing the correct tools to designing and cutting the pattern, the author reveals the closely guarded secrets of this lost art, which is well within the means of any capable gunsmith.   Mfg: Stock Shop
  5. Metal Checkering Files - 20 Lpi (#00)
    Item#:
    080-310-401  
    Our Price:
    $49.99
    Description:
    The only way to get true, accurate line spacing when checkering backstraps, triggerguards, grip frames, ribs and hammer spurs; anywhere an improved gripping surface is needed. Finer cuts give a nice matting effect to reduce glare and light distortion. Procedure is very similar to wood checkering. Layout your master lines (or use a guide like our .45 Checkering Guide), then establish the pattern by moving the file a few teeth each time using the previous lines as the guide. Once the pattern is fully laid out, bring to final depth with a 60° needle file. Mfg: Brownells SPECS: 8" (20.3cm) length x ½" (12.7mm) wide. Cutting area: 6" (15.2cm) x ½" (12.7mm).
  6. Metal Checkering Files - 30 Lpi (#0)
    Item#:
    080-310-411  
    Our Price:
    $49.99
    Description:
    The only way to get true, accurate line spacing when checkering backstraps, triggerguards, grip frames, ribs and hammer spurs; anywhere an improved gripping surface is needed. Finer cuts give a nice matting effect to reduce glare and light distortion. Procedure is very similar to wood checkering. Layout your master lines (or use a guide like our .45 Checkering Guide), then establish the pattern by moving the file a few teeth each time using the previous lines as the guide. Once the pattern is fully laid out, bring to final depth with a 60° needle file. Mfg: Brownells SPECS: 8" (20.3cm) length x ½" (12.7mm) wide. Cutting area: 6" (15.2cm) x ½" (12.7mm).

View All Checkering Tools Master Set »


Ammunition
  1. Ammunition Measurement System - Bullet/Cartr Dial #1
    Item#:
    749-013-804  
    Our Price:
    $21.99
    Description:
  2. Ammunition Measurement System - Bullet/Cartr Dial #2
    Item#:
    749-013-805  
    Our Price:
    $21.99
    Description:
  3. Ammunition Measurement System - Datum Dial, Kit
    Item#:
    749-013-803  
    Our Price:
    $105.00
    List Price: $113.99
    Description:
  4. Ammunition Measurement System - Datum Dial, Body
    Item#:
    749-013-802  
    Our Price:
    $74.99
    Description:
  5. Superformance Ammo 7mm-08 Remington 139gr Gmx - 7mm-08 Remington 139gr Gmx 20/Box
    Item#:
    749-101-472  
    Our Price:
    $35.79
    Description:
    Hornady has made a monumental breakthrough with its Superformance Ammunition increasing bullet velocity by an average of 100 to 200 fps for any caliber, bullet weight, or bullet type using progressive propellants. Superformance Ammunition can be used in any rifle without increasing felt recoil, muzzle blast, temperature sensitivity, fouling or loss of accuracy. Simply put, Superformance Ammunition is highly accurate, deadly, dependable, and just raised the bar by which all other ammunition will be judged. Previously, in order to attain high-velocity loads, shooters had to use the large charge weights and a slow-burning powder found in light magnum or custom loads, which typically result i Mfg: Hornady
  6. Solid Defense Ammo 223 Remington 70gr Tsx - 223 Remington 70gr Triple Shock-X 50/Box
    Item#:
    749-012-352  
    Our Price:
    $65.99
    Description:
    ASYM PRECISION Ammunition is meticulously manufactured using premium components, each carefully selected to deliver optimum performance. Our ammunition delivers the ultimate in reliability, match grade accuracy, consistency and clean burn, so shooters can focus on their marksmanship and tactics, rather than equipment. ASYM PRECISION law enforcement and defensive ammunition is purpose built to provide dependable, fight stopping terminal performance with minimum flash. Extensive quality control methods and procedures are used. Each cartridge is hand and mechanically inspected as well as gauge checked in a minimum spec chamber to ensure flawless chambering in any in-spec firearm. Lot ru Mfg: Asym Precision Ammunition

View All Ammunition »

Looking to buy Checkering Tools? Brownells.com carries the widest selection at the best prices on the web. Our selection of 46 Checkering Tools and Checkering Tools Master Set represents the best of the best, on sale at prices from $3.99 to $264.99. Our excellent selection of gun parts and gunsmith tools, along with our unwavering commitment to the best prices and customer service, has made us the number one online retailer in the industry. We love the products we sell, and we know you will, too. We provide a 100% satisfaction guarantee with all of our products, so if you're not satisfied with your Checkering Tools for any reason, let us know right away. So, browse our wide selection of Checkering Tools - we know you'll find what you're looking for. When you're ready to place an order, use our easy checkout or give us a call. We're passionate about meeting all your needs for gun parts and gunsmith tools, and we're confident you'll find what you need here. If you have any questions, don't hesitate to give us a call!