Brownells Brownells Brownells 75th Anniversary - A Shooting Heritage

Barrel Crowning Tool

Best Sellers
  1. Barrel Crowning Lathe Bit - 3/8" Barrel Crowning Bit
    Item#:
    080-658-375  
    Our Price:
    $34.99
    Description:
    A difficult tool to grind correctly. These are expertly done to give maximum cutter strength and proper clearance as cutter tip enters bore and shank approaches barrel. By taking careful cuts and moving table back and forth, any degree of crown shape can be cut. Mfg: Brownells
  2. Barrel Crowning Lathe Bit - 1/4" Barrel Crowning Bit
    Item#:
    080-658-250  
    Our Price:
    $29.99
    Description:
    A difficult tool to grind correctly. These are expertly done to give maximum cutter strength and proper clearance as cutter tip enters bore and shank approaches barrel. By taking careful cuts and moving table back and forth, any degree of crown shape can be cut. Mfg: Brownells
  3. 79° Muzzle Crowning Cutter - 1/2" 79° Crown Cutter
    Item#:
    080-586-500  
    Our Price:
    $52.99
    Description:
    Hardened steel, muzzle crowning tool cuts a slight (11° less than square) target chamfer on barrels. Gives good rifling protection without going too deep. 90° - 11° = 79°, hence the name. Eight, precision-machined flutes give smooth, chatter-free cuts to help eliminate extra lapping or stoning. ¼"-20 thread fits Brownells muzzle chamfering handles. Use with our muzzle pilots to ensure precise alignment with your bore. Available in ½" and ¾" diameters to accommodate most rifle/handgun barrel diameters. Mfg: Brownells SPECS: Tool Steel, 23/8” (6cm) overall length, ½" (1.3cm) or ¾" (1.9cm) O.D. ¼"-20 tpi.
  4. 79° Muzzle Crowning Cutter - 3/4" 79° Crown Cutter
    Item#:
    080-586-750  
    Our Price:
    $52.99
    Description:
    Hardened steel, muzzle crowning tool cuts a slight (11° less than square) target chamfer on barrels. Gives good rifling protection without going too deep. 90° - 11° = 79°, hence the name. Eight, precision-machined flutes give smooth, chatter-free cuts to help eliminate extra lapping or stoning. ¼"-20 thread fits Brownells muzzle chamfering handles. Use with our muzzle pilots to ensure precise alignment with your bore. Available in ½" and ¾" diameters to accommodate most rifle/handgun barrel diameters. Mfg: Brownells SPECS: Tool Steel, 23/8” (6cm) overall length, ½" (1.3cm) or ¾" (1.9cm) O.D. ¼"-20 tpi.
  5. Power Custom Brass Muzzle Crowning Lap - Muzzle Lap Set Non-Handled
    Item#:
    080-764-000  
    Our Price:
    $45.99
    Description:
    Four different sizes of brass laps produce a beautiful, finished crown on all pistol and rifle barrels when used with 600 grit silicon carbide abrasive and your hand drill. Mfg: Brownells SPECS: Brass. 3'''' (7.62cm) long. Sets include (4) laps, one of each size.
  6. Muzzle Facing/Crowning Cutter Drill - Drill Chuck Adapter
    Item#:
    080-962-000  
    Our Price:
    $12.99
    Description:
    Steel, double-ended adapter lets you use Brownells piloted Facing, Crowning and Chamfering Cutters with your drill press or electric drill motor to save valuable shop time and get a smooth, chatter-free, finish cut. Adapter accepts all Brownells ¼''''-20 threaded shaft cutters; converts them for easy insertion into any 3/8'''' or larger drill chuck. Mfg: Brownells SPECS: Steel, blue, matte finish. 2'''' (5cm) long, .360'''' (9.1mm) diameter shaft, ¼''''-20 thread.

View All Barrel Crowning Tool »

barrel crowning tool & Accessories

Related Items
  1. Power Custom Brass Muzzle Crowning Lap - Non-Handled Fits .44-50 Tip Radius 5/16" (7.93mm)
    Item#:
    080-764-500  
    Our Price:
    $16.99
    Description:
    Four different sizes of brass laps produce a beautiful, finished crown on all pistol and rifle barrels when used with 600 grit silicon carbide abrasive and your hand drill. Mfg: Brownells SPECS: Brass. 3'''' (7.62cm) long. Sets include (4) laps, one of each size.
  2. Power Custom Brass Muzzle Crowning Lap - Non-Handled Fits Bore .17-6.5mm Tip Radius 5/32"(3.96m
    Item#:
    080-764-243  
    Our Price:
    $13.45
    Description:
    Four different sizes of brass laps produce a beautiful, finished crown on all pistol and rifle barrels when used with 600 grit silicon carbide abrasive and your hand drill. Mfg: Brownells SPECS: Brass. 3'''' (7.62cm) long. Sets include (4) laps, one of each size.
  3. Power Custom Brass Muzzle Crowning Lap - Non-Handled Fits Bore Size .270-.35 Tip Radius 3/16"(4
    Item#:
    080-764-350  
    Our Price:
    $13.99
    Description:
    Four different sizes of brass laps produce a beautiful, finished crown on all pistol and rifle barrels when used with 600 grit silicon carbide abrasive and your hand drill. Mfg: Brownells SPECS: Brass. 3'''' (7.62cm) long. Sets include (4) laps, one of each size.
  4. Power Custom Brass Muzzle Crowning Lap - Non-Handled .38/.357-.41 Tip Radius 1/4" (6.35mm)
    Item#:
    080-764-410  
    Our Price:
    $13.99
    Description:
    Four different sizes of brass laps produce a beautiful, finished crown on all pistol and rifle barrels when used with 600 grit silicon carbide abrasive and your hand drill. Mfg: Brownells SPECS: Brass. 3'''' (7.62cm) long. Sets include (4) laps, one of each size.
  5. Barrel Bedding Tool - 9/16" Barrel Bedding Tool
    Item#:
    364-700-562  
    Our Price:
    $29.99
    Description:
    Perfect, chatter-free cut, shaves out excess wood, leaves barrel channel smooth and ready for barrel without gouging, rasping or final sanding. Cushioned-cutter design keeps hardened steel cutter discs at correct angle to remove wood without ''''digging in'''' regardless of amount of pressure. A favorite with pros. Mfg: Gunline SPECS: 10'''' (25.4cm) overall. Cut length approximate 1¼'''' (3.2cm). 7/8'''' and 1'''' diameter replacement cutters are sold 9 per pak, all other sizes are sold 11 per pak. Bbl. Bedding Tool Set includes ½'''', 9/16'''', 5/8'''', 11/16'''' and ¾'''' bedding tools complete with handles and cutter
  6. Barrel Bedding Tool - 11/16" Bedding Tool
    Item#:
    364-700-687  
    Our Price:
    $29.99
    Description:
    Perfect, chatter-free cut, shaves out excess wood, leaves barrel channel smooth and ready for barrel without gouging, rasping or final sanding. Cushioned-cutter design keeps hardened steel cutter discs at correct angle to remove wood without ''''digging in'''' regardless of amount of pressure. A favorite with pros. Mfg: Gunline SPECS: 10'''' (25.4cm) overall. Cut length approximate 1¼'''' (3.2cm). 7/8'''' and 1'''' diameter replacement cutters are sold 9 per pak, all other sizes are sold 11 per pak. Bbl. Bedding Tool Set includes ½'''', 9/16'''', 5/8'''', 11/16'''' and ¾'''' bedding tools complete with handles and cutter

View All Barrel Crowning Tool & Accessories »


Ammunition
  1. Superformance Ammo 243 Winchester 80gr Gmx - Horndy Ammo 243 80gr. Gmx
    Item#:
    105-201-201  
    Our Price:
    $34.99
    Description:
    Hornady has made a monumental breakthrough with its Superformance Ammunition increasing bullet velocity by an average of 100 to 200 fps for any caliber, bullet weight, or bullet type using progressive propellants. Superformance Ammunition can be used in any rifle without increasing felt recoil, muzzle blast, temperature sensitivity, fouling or loss of accuracy. Simply put, Superformance Ammunition is highly accurate, deadly, dependable, and just raised the bar by which all other ammunition will be judged. Previously, in order to attain high-velocity loads, shooters had to use the large charge weights and a slow-burning powder found in light magnum or custom loads, which typically result i Mfg: Hornady
  2. American Eagle Ammo 5.56x45mm Nato 55gr Xm193 - 5.56x45mm Nato 55gr Full Metal Jacket 20/Box
    Item#:
    105-200-942  
    Our Price:
    $8.99
    Description:
    Top-quality, new-manufactured mil-spec 5.56 x 45mm NATO XM193 FMJ ammo ideal for training & practice. This ammunition was produced at Lake City Army Ammunition Plant to Federal Cartridge Company specs for commercial ammunition.  55 grain FMJ boattail bullet – the exact load developed for the original M16 rifle. Headstamped with Federal logo and date of manufacture, reloadeable brass cases with crimped in boxer primers. Lacquer-sealed primer and case mouth to resist moisture. For use only in rifles with chambers designed for 5.56mm x 45 ammunition. Mfg: Federal
  3. Precision Match Ammo 223 Remington 69gr Hpbt - 223 Remington 69gr Hollow Point Boat Tail 20/Box
    Item#:
    105-000-308  
    Our Price:
    $29.99
    Description:
    World champion shooters like Glenn Dubis and Kelly Bachand understand consistency is accuracy. Eagle Eye Precision ammunition offers unsurpassed accuracy and consistency when it matters most. Eagle Eye Precision guarantees every lot is factory tested to 1/2 minute of angle or better. Eagle Eye Precision cases are manufactured from the highest quality CuZn28 brass discs (not third party cups) with the lowest levels of impurities (ie. tin, bismuth etc). In addition to unsurpassed metallurgy, Eagle Eye Precision uses a proprietary heat treating process above and beyond standard neck annealing to produce a case that can be reloaded 10+ times. Eagle Eye Precision use the highest quality m Mfg: Eagle Eye Precision Ammunition
  4. Bronze Ammo 50 Bmg 660gr Fmj - 50 Bmg 660gr Full Metal Jacket 10/Box
    Item#:
    105-000-352  
    Our Price:
    $43.99
    Description:
    Reliable performance from serious competition to casual paper punching. PMC’s popular Bronze Line ammunition makes it possible for recreational shooters and riflemen to enjoy high performance velocity and accuracy in a cost-effective cartridge. Bronze ammunition is available in Full Metal Jacket (FMJ) bullets in .223 Remington, .308 Winchester, 7.62x39mm and .50 BMG. Take advantage of PMC Bronze Line’s affordability for any situation that involves high-volume shooting without compromising downrange results. Bronze Line ammo bridges a gap for target shooters or hunters who get genuine pleasure from challenging themselves, shot after shot, to become better marksmen. Mfg: Pmc Ammunition, Inc.
  5. Bronze Ammo 7.62x39mm 123gr Fmj - 7.62x39mm 123gr Full Metal Jacket 20/Box
    Item#:
    105-000-351  
    Our Price:
    $16.99
    Description:
    Reliable performance from serious competition to casual paper punching. PMC’s popular Bronze Line ammunition makes it possible for recreational shooters and riflemen to enjoy high performance velocity and accuracy in a cost-effective cartridge. Bronze ammunition is available in Full Metal Jacket (FMJ) bullets in .223 Remington, .308 Winchester, 7.62x39mm and .50 BMG. Take advantage of PMC Bronze Line’s affordability for any situation that involves high-volume shooting without compromising downrange results. Bronze Line ammo bridges a gap for target shooters or hunters who get genuine pleasure from challenging themselves, shot after shot, to become better marksmen. Mfg: Pmc Ammunition, Inc.
  6. Umc Ammo 9mm Luger 115gr Jhp - 9mm Luger 115gr Jacketed Hollow Point 100/Box
    Item#:
    105-201-757  
    Our Price:
    $40.99
    Description:
    UMC AMMO 9MM LUGER 115GR JHP Mfg: Remington

View All Ammunition »

So, you're looking for Barrel Crowning Tool? Look no further than Brownells.com for the best prices and selection. We've got 14 Barrel Crowning Tool and Barrel Crowning Tool & Accessories, from $12.99 to $52.99, meaning your search is over. As the internet's top seller of gun parts and gunsmith tools, we're able to bring you the best products, excellent prices, and reliable customer service every day. We know you'll be happy with your purchase of Barrel Crowning Tool from Brownells.com. We stand behind every product we sell, and we're proud to prove it with our 100% satisfaction guarantee - if you're not completely happy with your purchase, let us know right away. So check out our complete selection of Barrel Crowning Tool and place your order online or by calling us toll free at 1-800-741-0015. We're here to provide you with all the gun parts and gunsmith tools and information you need, so - if you don't find what you're looking for online - give us a call!