Brownells Brownells Brownells 75th Anniversary - A Shooting Heritage

1911 Scope Mount

Best Sellers
  1. 1911 Grip Scope Mount - 1911 Grip Panel Scope Mount
    Item#:
    017-245-001  
    Our Price:
    $67.99
    Description:
    Replaces the grip on the right side of Colt-Style semi-auto frame so it can't interfere with thumb safety operation. "Quad Lock" installation system securely attaches the mount to the frame at four points. Accepts Weaver-style rings. No drilling or tapping. Mfg: Aimtech SPECS: Black-anodized, extruded aluminum. Approx. 5-1/2" long, 6" (15.2cm) high. Includes mounting pins and instructions. Cannot be used with ambidextrous safety or ambidextrous slide release.
  2. 1911 Gp Scope Mount - Gp Scopemount, Black
    Item#:
    957-000-051  
    Our Price:
    $79.99
    Description:
    A lower cost, rugged scopemount that adapts to all types of shooting. Solid side panels and no-flex design make this mount a great choice for pin shooting or any discipline that uses full-power loads. Lightweight feature helps reduce red-dot "carry over". Won't interfere with ejection or cycling. Accepts Weaver-style rings. Mfg: Weigand Combat SPECS: Extruded aluminum, silver, matte finish. 4½" (11cm) long. Fits 1911 Auto. Installation requires drilling and tapping of frame. Includes instructions and screws.
  3. 1911 Gp Scope Mount - Gp Scopemount, Silver
    Item#:
    957-117-200  
    Our Price:
    $79.99
    Description:
    A lower cost, rugged scopemount that adapts to all types of shooting. Solid side panels and no-flex design make this mount a great choice for pin shooting or any discipline that uses full-power loads. Lightweight feature helps reduce red-dot "carry over". Won't interfere with ejection or cycling. Accepts Weaver-style rings. Mfg: Weigand Combat SPECS: Extruded aluminum, silver, matte finish. 4½" (11cm) long. Fits 1911 Auto. Installation requires drilling and tapping of frame. Includes instructions and screws.
  4. 1911 Slide Mounted Scope Base - Scope Mount/Wo
    Item#:
    181-011-200  
    Our Price:
    $29.99
    Description:
    Lightweight top mount replaces the Bomar Tuner sight rib and accepts Weaver-style rings to give Bullseye-style guns the advantage of faster sighting, easy-to-shoot optics. Available without (WO) the cut-out for the tuner. Fits round top 1911's with front and rear sights removed.  There is NOT a slot cut for the front sight in the mount. Mfg: Clark Custom SPECS: Extruded aluminum, black-anodized finish. 7-1/8" (18cm) long, .874" (21.5mm) wide. 1.7 oz (48g) wt. Includes installation screws and wrench. Fits 5", Govt. length slides only. Accepts Weaver-style rings.
  5. 1911 3rd Generation Scopemount™ - 3rd Generation Scopemount, Black
    Item#:
    957-000-052  
    Our Price:
    $99.99
    Description:
    Exclusive, forward frame mount design positions both optical and electronic scopes low, directly over center of slide and grip frame for better balance and pointability. Lightweight, one-piece, no-flex, dependable base stands up to the demands of competitive pistol shooting. Won't interfere with ejection or cycling. Will accept the Tasco PDP4 40mm Red Dot Scope. Mfg: Weigand Combat SPECS: Extruded aluminum, silver-anodized finish. 4½" (11cm) long, 2 oz. (56g) wt. Fits 1911 Auto, Govt. length frame. Accepts Weaver-style rings. 3.296" (8.3cm) c-to-c ring spacing. Requires drilling and tapping of frame. Includes screws and installation instructions.
  6. 1911 3rd Generation Scopemount™ - 3rd Generation Scopemount, Silver
    Item#:
    957-210-000  
    Our Price:
    $99.99
    Description:
    Exclusive, forward frame mount design positions both optical and electronic scopes low, directly over center of slide and grip frame for better balance and pointability. Lightweight, one-piece, no-flex, dependable base stands up to the demands of competitive pistol shooting. Won't interfere with ejection or cycling. Will accept the Tasco PDP4 40mm Red Dot Scope. Mfg: Weigand Combat SPECS: Extruded aluminum, silver-anodized finish. 4½" (11cm) long, 2 oz. (56g) wt. Fits 1911 Auto, Govt. length frame. Accepts Weaver-style rings. 3.296" (8.3cm) c-to-c ring spacing. Requires drilling and tapping of frame. Includes screws and installation instructions.

1911 scope mount & Accessories

Related Items
  1. M-308 Scope Mount - M-308 Scope Mount 20 Moa
    Item#:
    100-016-058  
    Our Price:
    $99.95
    Description:
    Developed with Nikon's growing series of AR-308 riflescopes, this mount fits the Picatinny rail found on most flattop AR-308's. Engineered to the correct sighting height for most AR-308 platform rifles, this mount also allows access to the charging handle. Mfg: Nikon
  2. Ar Scope Mount - Ar Scope Mount 30mm
    Item#:
    100-013-749  
    Our Price:
    $104.99
    Description:
    Durable, Military Grade Mount With Forward Offset Provides Proper Eye Relief
  3. Ar-15/M16 Flattop Scope Mount - Flattop Scope Mount, 1"
    Item#:
    553-000-005  
    Our Price:
    $53.99
    Description:
    Integrated Mount & Rings For Rugged Strength
  4. 1911 Low Mount Thumb Safety - Ss, Low Mount Safety
    Item#:
    340-100-045  
    Our Price:
    $41.90
    Description:
    Places the thumb closer to the centerline of the bore; gives greater leverage and recoil control for shooters that use a high thumb hold. For shooters with smaller hands, the lower position is easier to reach and deactivate. Serrations on thumb pad help ensure positive thumb engagement. Mfg: Gunsite SPECS: Steel, blued or stainless steel, matte as-cast finish. Contact pad, 1.9'''' (2.8cm) long, .314'''' (8mm) wide. Installation requires gunsmith fitting.
  5. Rem 700 Integral Scope Mount - Integral Scope Mount
    Item#:
    768-194-250  
    Our Price:
    $31.99
    Description:
    Lightweight 1'''' rings with integral bases are custom made for Remington 700 rifles to provide fast, easy scope mounting with precise centering and error-free alignment. Made of advanced Z2 alloy, similar in weight to aluminum but 50% stronger. Hardened steel Torx® head screws retain top ring half and clamp base to factory receiver holes. Reversible to allow different ring spacing for mounting anything from extra long varmint/target scopes to short, compact optics. Base provides 100% metal-to-metal contact with the receiver for recoil-proof holding power with no loss of zero. Mfg: Remington SPECS: Z2 alloy, powdercoat finish, matte black. Accepts 1" dia. scopes. Height measured from top of receiver to bottom of scope - .70" (1.7cm). Fits long and short action Remington 700.
  6. 1911 Low Mount Thumb Safety - Blue Low Mount Safety
    Item#:
    340-100-044  
    Our Price:
    $41.90
    Description:
    Places the thumb closer to the centerline of the bore; gives greater leverage and recoil control for shooters that use a high thumb hold. For shooters with smaller hands, the lower position is easier to reach and deactivate. Serrations on thumb pad help ensure positive thumb engagement. Mfg: Gunsite SPECS: Steel, blued or stainless steel, matte as-cast finish. Contact pad, 1.9'''' (2.8cm) long, .314'''' (8mm) wide. Installation requires gunsmith fitting.

Ammunition
  1. Tactical Magazine Cans Tan - Tactical Magazine Can Ar Polymer Tan
    Item#:
    100-574-004  
    Our Price:
    $21.99
    Description:
    Always ready for quick transport, Tactical Mag Cans offer a protected method of storage for loaded magazines. Each mag is individually secured with ridged precut foam padding to prevent bumping, sliding and scratching. Each box shuts tight with an O-ring seal and solid latching system. Security tabbed for two padlocks. Molded-in stacking ridges for slip resistant stacking. Handgun owners can rest assured knowing their cache is protected inside MTM Mag Cans. Comfortable handle for when you’re bugging out. Tactical Magazine Can 1911: Designed to hold 1911 handgun magazines and similar sized magazines in precut foam padding Stackable design and double padlock tabbed f Mfg: Mtm
  2. Tactical Magazine Cans Tan - Tactical Magazine Can Ak Polymer Tan
    Item#:
    100-574-007  
    Our Price:
    $24.99
    Description:
    Always ready for quick transport, Tactical Mag Cans offer a protected method of storage for loaded magazines. Each mag is individually secured with ridged precut foam padding to prevent bumping, sliding and scratching. Each box shuts tight with an O-ring seal and solid latching system. Security tabbed for two padlocks. Molded-in stacking ridges for slip resistant stacking. Handgun owners can rest assured knowing their cache is protected inside MTM Mag Cans. Comfortable handle for when you’re bugging out. Tactical Magazine Can 1911: Designed to hold 1911 handgun magazines and similar sized magazines in precut foam padding Stackable design and double padlock tabbed f Mfg: Mtm
  3. Tactical Magazine Cans Tan - Tactical Magazine Can Double Stack Polymer Tan
    Item#:
    100-574-008  
    Our Price:
    $14.99
    Description:
    Always ready for quick transport, Tactical Mag Cans offer a protected method of storage for loaded magazines. Each mag is individually secured with ridged precut foam padding to prevent bumping, sliding and scratching. Each box shuts tight with an O-ring seal and solid latching system. Security tabbed for two padlocks. Molded-in stacking ridges for slip resistant stacking. Handgun owners can rest assured knowing their cache is protected inside MTM Mag Cans. Comfortable handle for when you’re bugging out. Tactical Magazine Can 1911: Designed to hold 1911 handgun magazines and similar sized magazines in precut foam padding Stackable design and double padlock tabbed f Mfg: Mtm
  4. Tactical Magazine Cans Tan - Tactical Magazine Can 1911 Polymer Tan
    Item#:
    100-574-006  
    Our Price:
    $14.99
    Description:
    Always ready for quick transport, Tactical Mag Cans offer a protected method of storage for loaded magazines. Each mag is individually secured with ridged precut foam padding to prevent bumping, sliding and scratching. Each box shuts tight with an O-ring seal and solid latching system. Security tabbed for two padlocks. Molded-in stacking ridges for slip resistant stacking. Handgun owners can rest assured knowing their cache is protected inside MTM Mag Cans. Comfortable handle for when you’re bugging out. Tactical Magazine Can 1911: Designed to hold 1911 handgun magazines and similar sized magazines in precut foam padding Stackable design and double padlock tabbed f Mfg: Mtm
  5. Win 1911 Ammunition - Win 1911 .45 Acp 230gr Fmj 50/Box
    Item#:
    105-000-437  
    Our Price:
    $26.79
    Description:
    Offering performance and reliability specifically designed for use in 1911 firearms, Win1911 provides a choice of personal defense or training ammunition that has been matched for ballistic performance and engineered for the same feel and function. Nickel-Plated Bullet Ballistically Matched Sure Functioning Mfg: Winchester
  6. Win 1911 Ammunition - Win 1911 .45 Acp 230gr Jhp 500/Case
    Item#:
    105-000-438  
    Our Price:
    $389.99
    Description:
    Offering performance and reliability specifically designed for use in 1911 firearms, Win1911 provides a choice of personal defense or training ammunition that has been matched for ballistic performance and engineered for the same feel and function. Nickel-Plated Bullet Ballistically Matched Sure Functioning Mfg: Winchester

View All Ammunition »

Shopping for 1911 Scope Mount? Count on Brownells.com to provide the best selection and prices every day. With 6 1911 Scope Mount and 1911 Scope Mount & Accessories in stock ranging in price from $29.99 to $99.99, you'll find all the best choices available. Our passion for gun parts and gunsmith tools has made us the online retailer to beat. We'll bring you excellent customer service, unbeatable prices, and the very best products every day. Your satisfaction is our top priority, so we offer a 100% satisfaction guarantee on all of our products. If you're not completely satisfied with your 1911 Scope Mount, give us a call right away and we'll make it right. When you find the 1911 Scope Mount that are right for you, it's easy to place your order online or over the phone at 1-800-741-0015. We're passionate about meeting all your needs for gun parts and gunsmith tools, and we're confident you'll find what you need here. If you have any questions, don't hesitate to give us a call!