Shop Online

Search
Search
Manufacturer (Show All Mfg)
clear filters
GunTech™

Other Ways to Shop

Direct Stock Entry
Schematics
Go OR View All Schematics
Factory Gun Parts
Factory Gun PartsFind the factory gun parts you need with our patented "Shop by Schematics".

FAQ

Go
Page: 1 2 3 4  ... 
  1. How do I become a gunsmith and obtain an FFL?
  2. I would like to have a computer program that figures ballistics tables, bullet drop, and windage. Ideally, I want to be able to take it to the range on a laptop for initial accuracy tests.
  3. What would be the best solution to repair a stripped grip screw in an aluminum/alloy framed pistol?
  4. I have a Taurus Tracker Model 627 with a 6½" barrel. I am wondering if the Revolver Scopemount can be used on this Taurus model.
  5. I purchased an Optivisor from you approximately 18 years ago and need a new comfort band. While the picture of the Optivisor you have online looks pretty much the same as mine, I want to be sure that the comfort band you currently offer will fit.
  6. I'm trying to buy a Leupold Scopesmith Magnetic Boresight. I couldn't find this particular item in your list. Do you carry it?
  7. I am looking for some .22LR dummy cartridges. Could you please describe these cartridges?
  8. I am looking for a small milling machine. I know there are large ones available but I need a smaller one. Does Brownells carry such an item?
  9. I am looking for a set of general purpose stones to improve the triggers on my various military type guns from the AR, AK, to M1 Garands and Carbines. What do you recommend?
  10. What is the best size lathe for putting in a home gun repair shop, and do you carry them?
  11. I'm looking for a remote, pressure-sensitive switch for a Surefire 6R flashlight. I currently have this light mounted on my AR-15 and have to use my thumb to activate the light momentarily. What do you suggest?
  12. I have a Russian Tokarev Model 1940 in 7.62 x 54R. My problem is that I can not get a cartridge to seat in the chamber. Any ideas as to what is causing the problem?
  13. Is it necessary to use cutting oil when all you are doing is drilling a shallow hole?
  14. In an old gunsmithing book there was a reference to blue stone. What is this?
  15. Why do some bullets have a boat tail design while others have a flat base?
  16. When installing a barrel in a receiver, is it necessary to put any lubricant on the barrel threads?
  17. Which is the most accurate trigger pull weight set, a spring recording set or a fixed weight set?
  18. In gunsmithing, what is a witness mark?
  19. Are action proving dummies and snap caps the same thing?
  20. Can you damage a receiver with a standard V type action wrench?
  21. What is the composition of India stones?
  22. Which is more useful, a nylon or a steel bench block?
  23. What is the difference between the Brownells Positive Stop 6-48 plug screws and the regular plug screws?
  24. What is the difference between a starter punch and a drift punch?
  25. How can I tell if the barrel on my bolt action rifle has right hand or left hand twist rifling?
  26. My .22 rimfire rifle has a bulge in the bore about four inches from the muzzle. Should I replace this barrel?
  27. I have a bulge in the 30" barrel of my Remington 870 approximately 5" from the muzzle. Can this bulge be swaged back?
  28. Will a 30" barrel shoot further than a 26" barrel?
  29. What is the difference between the Muzzle Crowning Laps with handles and those without handles?
  30. Why is it not a good idea to leave a light coating of oil in a rifle chamber? It seems to me that it would help to prevent rust.
  • ® 2009, Brownells, Inc.
  • All Rights Reserved
  • info@brownells.com
  • Phone (800) 741-0015
  • FAX (800) 264-3068