Brownells Brownells Brownells 75th Anniversary - A Shooting Heritage

Sub Categories

Narrow By…

Make/Model

Quick Links

(2938 video/articles)
  • Grid View List View
Parker Hale Bipod Adapter
Parker Hale Bipod Adapter

The Brownells Parker Hale Bipod Adapter allows the installation of a Parker Hale Bipod Spigot onto any rifle that has an Uncle Mike’s Sling Swivel Stud located on the forearm.

Ruger 77 Milled Steel Triggerguard
Ruger 77 Milled Steel Triggerguard

Brownells Ruger 77 Milled Steel Triggerguard replaces the aluminum factory unit with minimal fitting and provides the owner of the rifle a more durable, rugged and esthetically-pleasing triggerguard.

Long Gun Shipping Box
Long Gun Shipping Box

Fold the Long Gun Shipping Box as shown in the drawing. Secure the side tabs and the fold over end flap with polypropylene tape included. If a lock-in-place liner is used, fold it along the score marks to raise the two “V” ribs, then cut notches in the ribs to fit the gun being shipped.

Flex-Hone Polishing System
Flex-Hone Polishing System

If high pressure or maximum pressure loads are to be used in any rifle you are considering using Brownells Flex-Hone Polishing System on, care must be taken to avoid enlarging the chamber past SAAMI “Maximum” dimensions and to prevent “too smooth” a finish.

Adjustable Pillar Bedding Kits & Sleeves
Adjustable Pillar Bedding Kits & Sleeves

Pillar bedding creates a uniform bedding surface and helps eliminate changes in guard screw tension, thus enhancing accuracy in many bolt action rifles,. Brownells Adjustable Pillar Bedding Sleeves are aluminum with steel sleeves threaded together to allow precise adjustment to fit individual rifles.

45 Degrees Twelve-Flute Muzzle Chamfer Cutter
45 Degrees Twelve-Flute Muzzle Chamfer Cutter

The tools covered in these instructions are designed to help the gunsmith or hobbyist restore rifle muzzles accurately, without a lathe. The precisionmachined, interchangeable, brass pilots make this possible.

Double Set Trigger
Double Set Trigger

The Double Set Trigger (DST) for the Model 98 Mauser comes assembled and includes a loose new kick-off piece. Pulling the rear trigger cocks the front trigger.

Remington Rivetless Extractors
Remington Rivetless Extractors

Remington introduced their rivetless extractor prior to 1981, with the Varmint rifles chambered in 7mm-08 caliber. It has since been used on all centerfire rifles including their pump and autoloading models, replacing the riveted extractor used on the models 740, 742, 760, 700, 600 and XP-100.

Acraglas Gel - Atomized Metal
Acraglas Gel - Atomized Metal

Thank You for your request for the ACRAGLAS GEL Atomized Aluminum and Atomized Steel Test Pak.We are delighted that you want to try these. They will add some very special and unique characteristics to the already excellent properties of ACRAGLAS GEL that we hope you will find useful in your particular application.

Acraglas Gel
Acraglas Gel

Introduced in 1978, “GEL” has become the most popular bedding compound available, and we guarantee your satisfaction 100%. Investing the time and craftsmanship to “bed” a gun is one of the most rewarding things you can do to improve a rifle’s accuracy and consistency.

Competitor Plus Rifle Sling
Competitor Plus Rifle Sling

Place the sling on a flat surface, on edge, with the Short Strap to your left, rough side facing you and the “D” ring to the right. Place the Long Strap on your right with the smooth side facing you, and the Feed End (the other end is called the Hook End) to the left.

The Squirrel Sniper Subsonic Rifle Or The Ssssr
The Squirrel Sniper Subsonic Rifle Or The Ssssr

My SSSSR project started when we began carrying the Volquartsen SSS Bbl for the Ruger 10/22. The 1 in 9 fast twist stainless steel 18 ½” Bbl is specifically designed to accurately shoot the heavy Aguila SSS ammunition.