Login or Create an Account

View Cart 
Shop Online

GunTech™home

Search
Search
Category
Filter By Media Type
clear filters

Other Ways to Shop

Direct Stock Entry
Schematics
Go OR View All Schematics

Promotions

New Products

view all

Hot Sellers

view all

Clearance Items

view all

Rebates

view all

Search Results


Showing 1 to 12 of 45 items.
Brownells Oversized Charging Handle Latch Instructions
Brownells Oversized Charging Handle Latch
You will need a 4 ounce to 8 ounce ball peen hammer and a 3/32 roll pin punch or starter punch and roll pin holder to replace your existing latch. We recommend using a bench block to capture the roll pin you remove as it is easily lost.


click to view
AR-15/M16 Magazine Lip Gauge Instructions
AR-15/M16 Magazine Lip Gauge
This tool is designed to gauge the feed lips of the standard 5.56/.223 Remington caliber magazines and can be used to diagnose feeding problems or prevent them from occurring.


click to view
Brownell Mini Rail Instructions
Brownell Mini Rail
The Brownells Mini Rail is designed to clamp to the Picatinny rail system and add approximately 1/2" height to an optic or other device requiring additional height for alignment.


click to view
Brownells AR-15/M16 Front Sling Swivel Staking Tool Instructions
Brownells AR-15/M16 Front Sling Swivel Staking Tool
This tool is designed to be used to replace or repair a missing or damaged front sling swivel rivet on the AR-15/M16 family of rifles and carbines. Make sure the firearm is unloaded prior to using this tool. It is best to fix the rifle bottom side up in a padded vise to control it during rivet installation.


click to view
Low Profile Gas Block Instructions
Low Profile Gas Block
1) If rifle is equipped with a standard two-piece handguard, remove it. 2) Place the front sight assembly on your bench block and using the roll pin punch, drive out the gas tube cross pin, left-to-right.


click to view
AR-15/M16 Barrel Extension Torque Tool Instructions
AR-15/M16 Barrel Extension Torque Tool
This tool allows for straight line application of torque compounding the torque settings and allows the use of a barrel nut or free float nut tool and vise without danger of scuffing or scaring the exterior of the upper receiver.


click to view
How To Build An AR-15 DVD PDFs Instructions
How To Build An AR-15 DVD PDFs
Get your PDF instructions for the How To Build An AR-15 DVD.


click to view
Brownells AR-15/M16 9mm Flash Suppressor Instructions
Brownells AR-15/M16 9mm Flash Suppressor
Install lock nut or peel washer onto threaded portion of the barrel and remove Brownells Compensator from package and thread it onto the barrel.


click to view
Brownells AR-15/M16 Flash Hider Instructions
Brownells AR-15/M16 Flash Hider
Install lock nut or peel washer onto threaded portion of the barrel and remove Brownells Flash Hider from package and thread it onto the barrel.


click to view
Brownells AR-Style .308 Muzzle Brake Instructions
Brownells AR-Style .308 Muzzle Brake
Remove upper receiver and barrel assembly from the gun and secure it in suitable padded vice jaws or upper receiver vise blocks. Remove existing flash hider or compensator from the gun by turning it in a counter-clockwise direction.


click to view
Brownells AR-Style .308 Flash Suppressor Instructions
Brownells AR-Style .308 Flash Suppressor
Remove upper receiver and barrel assembly from the gun and secure it in suitable padded vice jaws. Remove existing flash hider or compensator from the gun by turning it in a counter-clockwise direction.


click to view
Brownells Oversized Triggerguard Instructions
Brownells Oversized Triggerguard
The Brownells Triggerguard is designed to give the extra room you need when using gloves or for special applications without gloves.


click to view