Learn how to install the Brownells Oversized Charging Handle Latch by watching this video.
This clip demonstrates step by step how to remove and install an aftermarket mainspring house and magazine funnel on the 1911 pistol.
This video is a demonstration of the AR-15/M16 Gas Piston Conversion Kit Installation.
This video is a descripton of the Brownells CMMG .22LR Conversion Kit and it's installation.
This video segment is a description of the Firebird P Mag Coupler.
This video segment is a description of the Samson Manufacturing Corp Quick-Flip Mount For Aimpoint 3xmag.
This video segment is a description of the Brownells AR-15 Magazine Feed Lip Tool.
This video segment is a description of the Brownells AR-15 Hammer Drop Block.
This video segment is a description of the The High Standard Lower Receiver Parts Kit.
This video segment is a description of the Samson Manufacturing AR-15/M16 Field Survivor Tool.
This video clip demonstrates the installation of the the front sight post and sling swivel that is held in place with a rivet.
This video is a demonstration on how to install a barrel on a 10/22.
Read & Follow These Instructions
STEP ONE: Remove the hammer spring assembly from the firearm.
To do this, you cock the lever, and on the forward end of the hammer strut there is a hole exposed, just forward of the hammer spring retaining washer.
This kit includes replacement parts for the grip, springs, and the clip draw and tools needed to install those parts. Because springs are under compression, safety glasses are advised.
You will need a long-handled large flat-blade screwdriver, a vise with padded jaws, a Phillips-head screwdriver, and the Brownells Forend Wrench
You will need the tools and parts contained in the Brownells Power Custom 10/22 Upgrade Kit.
The items in this kit include a replacement trigger and tools (punch kit, nylon/brass hammer, and bench block). Not included are needlenose pliers and flathead driver or Allen-head wrench for action screws. Snap Caps of the appropriate caliber are optional to safely test, adjust, and function-test the new trigger.
You will need a 4 ounce to 8 ounce ball peen hammer and a 3/32 roll pin punch or starter punch and roll pin holder to replace your existing latch. We recommend using a bench block to capture the roll pin you remove as it is easily lost.
tool is designed to gauge the feed lips of the standard 5.56/.223 Remington caliber magazines and can be used to diagnose feeding problems or prevent them from occurring.
Brownells Mini Rail is designed to clamp to the Picatinny rail system and add approximately 1/2" height to an optic or other device requiring additional height for alignment.
tool is designed to be used to replace or repair a missing or damaged front sling swivel rivet on the AR-15/M16 family of rifles and carbines. Make sure the firearm is unloaded prior to using this tool. It is best to fix the rifle bottom side up in a padded vise to control it during rivet installation.
1) If rifle is equipped with a standard two-piece handguard, remove it.
2) Place the front sight assembly on your bench block and using the roll pin punch, drive out the gas tube cross pin, left-to-right.