Shop Online

Search
Search
Manufacturer (Show All Mfg)
clear filters

Other Ways to Shop

Direct Stock Entry
Schematics
Go OR View All Schematics
SERIES I STONING FIXTURE
  • Bookmark and Share

SERIES I STONING FIXTURE

  • POWER CUSTOM
  • $2.99 - $166.43
  • Made in the U.S.A.
  • Ultimate For Hammer & Sear Work; Accurate, Repeatable Setup
Save time and money by providing repeatable setup, accurate, measurable adjustments and suitability for many guns. Eighteen economical hammer and trigger/sear adapters are available for popular guns plus, hammer and trigger/sear alignment pin holes are provided for six different guns; 24 jigs combined in one fixture. To use: mount hammer or trigger/sear on adapter, set and lock at correct index mark as instructed. Set stoning angle by counting "clicks" specified to raise or lower elevator and stoning guide. Lock guide, place stone on both roller and hammer or trigger/sear, and stone as normal. Easily adjustable to allow variations in stoning angle for exact, desired trigger pull weight. Same tool Ron Power uses in his own shop. Complete with one adapter and very detailed instructions written by Ron. You will also need a #10 Machinist's Clamp and 6"x1/2"x1/2" stones.

SPECS: 5-9/16" (14.1cm) long x 2-9/16" (6.5cm) wide x 3" (7.6cm) high. ¾" (19mm) thick base. 5¾" lb. (2.6kg) Blued steel. Includes roller guide and one adapter in the price.

Catalog page 407, 115