With Special Tools For Colts & Mausers
The 30 tools and bits in the Assembly/Disassembly Kit are
basically the same as those in the Basic Starter Kit except that
four highly specialized tools have been substituted, making the Kit
better equipped for somewhat more advanced professional work.
Our decision on the tools is based on the fact that once a person
gets started doing some gunsmithing, they quickly discover they
are being brought a wider variety of guns than they had
anticipated and that certain, seemingly "normal", assembly and
disassembly steps can be difficult without the right tools. (This Kit
is of paramount value to anyone doing gun rebluing and general
repair service.)
Colt handguns will be a part of your living.
Whenever you disassemble either large or small frame revolvers,
the ejector must be removed from the cylinder prior to polishing,
bluing or servicing. The Colt Tool in the Kit makes this otherwise
ticklish job quite simple. Plus, the tool makes it easier to remove or
install tight 1911 Auto bushings.
The Bolt Extractor Pliers
can only be appreciated by one who has fought the removal and
installation of a stiff extractor on an Enfield, Springfield, Mauser or
similar bolt . . . Especially when your hands are "gunsmith greasy".
Comes with illustrated instructions showing how to use when
taking them off or putting them on.
Magazine retaining
caps on Ithaca 37's, Winchester Model 12's and similar, positively
require the special Winchester Model 12 Wrench to remove. Well
made and 100% guaranteed for quality and performance. Will
handle the toughest. Then there is the little 7/64" Speed-Head
(Ball End) Socket Wrench. The first time you encounter a scope
ring (like on the new Redfields) with Allen head screws on the
bottom side of the rings, you will praise this tool for the lifesaver it
is.
Assembly/Disassembly Kit contains the following
tools: No. 100 Parallel Pliers; 1" Nylon/Brass Hammer; No. 81
MAGNA-TIP® Screwdriver;
Screwdriver Bits Nos. 1 - 2 - 6 - 00 - 10 - 20 and 30; Two sizes
Instrument Screwdrivers; Main Spring Vise; MF134 India Stone;
M-16 Brush; 1/8" x 6" Pin Punch; 5/32" x 6" Pin Punch; 1/16"
Starter Punch; 3/32" Starter Punch; Brownells Replacement
Pin-Punch Set; 2" Replacement Punch Assortment; Nylon/Brass
Drift Pin Punch Set; Gunsmith Bench Knife; 8" No. 2 Cut Hand File;
Sight Base File; Brownells Colt Pistol Wrench; Brownells
Winchester Model 12 Wrench; Bolt Spring Extractor Pliers; Screw
Check'r; 7/64" Speed-Hex (Ball-end) Wrench and Kit Box.