Compact, go-anywhere kit contains all the essential tools needed to disassemble, maintain, and repair today’s common tactical and law enforcement shotguns. Not a run-of-the-mill cleaning kit with generic tools, but a set of carefully selected, high-quality armorer tools designed to perform specific tasks on Benelli, Mossberg 500/590/835, and Remington 870/1100/11-87 shotguns. You’ll have the exact tool you need at your fingertips, without scrounging through a case full of tools for other guns or lugging around unnecessary weight. There’s a universal double-ended forend wrench for easy, non-slip removal of the forend nut without damage. Magazine tube pliers have adjustable, padded, curved jaws for easy removal of mag tubes and stuck magazine caps without marring the finish. T-handle driver comes with correct sockets for removing buttstock bolts, including a self-guiding, sleeved socket for the 870 and a socket for the new action spring tube nut on current-production Remington Model 11-87 Police shotguns (will also fit current 1100). Use the punch set with the brass/nylon head hammer and non-marring bench block to remove retaining pins while protecting the gun’s finish. The full-size #84 Magna-Tip screwdriver comes with the necessary interchangeable bits, including a 12-gauge shotgun choke tube wrench and an extra-long 3/16" Philips head bit for recoil pad screws. Our handy packing hook tool is indispensable for grasping, locating, or releasing springs and small parts. Plenty of compartments inside the water- and tear-resistant, 1000 denier Cordura case let you secure the tools to minimize unwanted shifting and noise. Quiet, #9 YKK nylon zippers with oversize pulls ensure fast, easy access to the tools. Front panel features a clear, I.D. card sleeve, loop strip for name tape, and ¾" wide, nylon grab handles for easy carry.
SPECS: Contains tools for working tactical/law enforcement models of Benelli, Mossberg 500/590/835, and Remington 870/1100/11-87 shotguns. Contents - Magna-Tip® screwdriver handle with #210-5 and #270-5 slotted bits, 3⁄16" Philips bit, and Magna-Tip choke tube wrench; 12-gauge shotgun forend wrench; magazine tube/cap pliers; 3⁄8" socket drive, T-handle, and extension with ½” socket, drag link, Rem 870 buttstock bolt socket, and 11⁄16" socket for current-production Rem 1100/11-87 action spring tube nut; nylon/brass hammer; nylon bench block; 6” chain nose pliers; 1⁄16" and 3⁄32" starter punches and pin punches; packing hook; 12-gauge shotgun Bore Snake®; ¼ oz. (7.4ml) Friction Defense® gun oil; and double-ended parts cleaning brush. Case - 1000 denier Cordura® nylon, O.D. green. 11½” (29.2cm) long, 8½” (21.6cm) high, 3” (7.6cm) thick.
Catalog page 429, 475