COMPM4 WITH FREE BACKUP SIGHT

For a limited time, you can get the latest civilian version of the U.S. Army’s M68 CCO (Close Combat Optic) red dot sight, plus an A.R.M.S. flip up "iron" sight—normally sold separately for $145.00—for less than the cost of the red dot alone! Aimpoint's most advanced sight, the CompM4 combines parallax-free aiming with a bright, glowing, red 2 MOA dot in a uniquely fast, instinctive, accurate sighting system for tactical and combat shooters that's an equally excellent choice for varmint hunters needing a rugged red dot optic with outstanding low-light capabilities. Optics feature band pass objective lens coating for superb light transmission and optimum 3rd generation NVD compatibility. Rotary brightness switch provides 7 NVD settings, 9 daylight settings, and an extra-bright setting for outdoor use with anti-reflective goggles. Super efficient electronics deliver up to eight years of constant-on power from a single AA battery. Proprietary aluminum housing and lens sealing material keep electronics and lens surfaces dry, fog-free, and fully functional regardless of weather conditions. Comes ready to mount on your rifle, no additional hardware needed. Integral QRP2 mount allows fast installation and removal from Picatinny rail, and includes a removable vertical spacer for fast adaptation to a wide range of firearms. Includes Tenebraex killFlash® anti-reflection device and military-style rubber lens covers. Use the A.R.M.S. 40L Low-Profile Flip-Up Rear Sight two ways: folded and locked down in backup mode, or raised to co-witness with CompM4. With the 40L folded, simply disengage the release lever, and the spring-loaded sight instantly pops into position while you remain on target. Folded sight sits only 5/8" above the rail. Dual apertures are calibrated for 250 and 300 meter ranges; vertical notch above apertures is designed for shooting inside 50 meters. Windage adjustable using large, 7/16" diameter side knob. Easily mounts to Picatinny receiver rail behind the Comp M4 using a stainless steel cross bar and clamp secured by a locknut. Precision machined aluminum and steel construction. Regulates properly with standard issue front sights.

SPECS: CompM4 - Aluminum housing, anodized, black, matte finish. 4.7” (120 cm) long, 2.8” (7.2m) wide, 2.8” high. 11.8 oz. (335 g) wt. including mount. 1x magnification. Windage & Elevation: ½" adjustment @ 100 yds (13mm @ 100m). Battery life = 80,000 hrs on one battery on daylight setting, 500,000 hrs on NV setting. Includes alkaline battery (1.5v, AA). Submersible to 150 feet (45m). 40L – Aluminum base, stainless steel sight body, steel apertures. 2-1/8" (5.4cm) long, 1-3/8" (3.4cm) wide, 1-5/8" (4.2cm) high from top of rail (extended), 5/8" high (1.5cm) (folded).