Brownells Brownells Brownells 75th Anniversary - A Shooting Heritage

Remington 700

(110 video/articles)
  • Grid View List View
Choate Target and Sniper Stocks
Choate Target and Sniper Stocks

This video showcases the Choate Fully Adjustable Innovative, Drop-In Design for select bolt actions.

Brownells Remington 700 ADL to BDL Conversion Kits
Brownells Remington 700 ADL to BDL Conversion Kits

This video segment is a description and demonstration of the installation of Brownells Remington 700 ADL to BDL Conversion Kits.

Brownells Remington 700 Armorer’s Kit
Brownells Remington 700 Armorer’s Kit

This video segment is a description of the tools and their purpose for the Brownells Remington 700 Armorer's Kit.

Remington 11-87/1100 Barrel Seal & Piston & Piston Seal Assembly
Remington 11-87/1100 Barrel Seal & Piston & Piston Seal Assembly

This video provides a demonstration about and how to install a Remington 11-87/1100 barrel seal & piston and piston seal assembly.

VANG Comp Systems Remington 870/1100/11-87 Ghost Ring Sights
VANG Comp Systems Remington 870/1100/11-87 Ghost Ring Sights

This video segment is a description of the VANG Comp Systems Remington 870/1100/11-87 Ghost Ring Sights.

Mesa Tactical Products Rem 870/1100/11-87 Receiver Mount Sling Attachment
Mesa Tactical Products Rem 870/1100/11-87 Receiver Mount Sling Attachment

This video segment is a description of the Mesa Tactical Products Rem 870/1100/11-87 Receiver Mount Sling Attachment.

Brownells Oversized Tactical Bolt Knob
Brownells Oversized Tactical Bolt Knob

This video segment is a description of the Brownells Oversized Tactical Bolt Knob.

Accuracy International Rem. 700 AICS Detachable Magazines
Accuracy International Rem. 700 AICS Detachable Magazines

This video segment is a description of the Accuracy International Rem. 700 AICS Detachable Magazines.

Rifle Basix  Remington 700 Rem-Saf Safety
Rifle Basix Remington 700 Rem-Saf Safety

This video segment is a description of the Rifle Basix Remington 700 Rem-Saf Safety.

Surgeon Rifles Short-Action Receiver & Bolt
Surgeon Rifles Short-Action Receiver & Bolt

This video segment is a description of the Surgeon Rifles Short-Action Receiver & Bolt.

Williams Firearms Rem 700 and Win M70 Custom Steel Floorplate
Williams Firearms Rem 700 and Win M70 Custom Steel Floorplate

This video is a demonstration of the Williams Firearms Rem 700 and Win M70 Custom Steel Floorplate.

Using JB Bore Paste and Kroil with the VFG Bore Pellets
Using JB Bore Paste and Kroil with the VFG Bore Pellets

This video demonstrates how to properly clean your rifle or shotgun bore with JB Bore Paste, Kroil and VFG Pellets. This method should restore accuracy in fowled barrels and is used by top bench rest shooters.

  • Grid View List View
Glas Bedding A Remington 700
Glas Bedding A Remington 700

Consistent accuracy is what all shooters are ultimately looking for when hunting or target shooting.

Tom Gresham Gunsavr Kit Remington 700
Tom Gresham Gunsavr Kit Remington 700

The Brownells/Tom Gresham HuntSavr kit was designed to enable the average sportsman to make simple firearm repairs while in the field. While it is impossible to provide solutions for every emergency, the HuntSavr kit supplies solutions to some common problems that would otherwise render the gun useless.

Remington 870 Ejector Spring Rivet Cutter
Remington 870 Ejector Spring Rivet Cutter

The 870 ejector uses a riveted spring to propel the fired shot shell out of the receiver. This ejector spring will occasionally break. Traditional repair methods replace not only the ejector spring, but also the rivet.

Tom Gresham Huntsavr Kit Remington 870/1100/11-87
Tom Gresham Huntsavr Kit Remington 870/1100/11-87

The Brownells/Tom Gresham HuntSavr kit was designed to enable the average sportsman to make simple firearm repairs while in the field. While it is impossible to provide solutions for every emergency, the HuntSavr kit supplies solutions to some common problems that would otherwise render the gun useless.

Bolt Lapping Tools
Bolt Lapping Tools

In order to obtain maximum accuracy in any rifle, the bolt locking lugs must sear evenly and completely in the receiver. In addition, by having all lugs bear evenly, the stresses placed on the bolt during firing are distributed uniformly no one lug is subjected to undue pressure.

Bolt Body Heat Sink
Bolt Body Heat Sink

Alterations of rifle bolts should be done with great care, especially if intense heat is used for welding, soldering, or brazing. The heat treatment of the locking lugs as well as other critical areas of the bolt such as the cocking cam must not be altered.

Rifle Action Wrench System
Rifle Action Wrench System

Removing or installing a rifle barrel is a common gunsmithing task, yet it can sometimes be quite difficult. In addition to problems caused by the tight fit of the barrel threads in the receiver, the gunsmith may encounter problems directly related to his action wrench.

Remington 700-Type Riveted  Extractor
Remington 700-Type Riveted Extractor

Earlier Remington centerfire bolt action, pump action and autoloading rifles use an extractor that is riveted into the bolt. When an extractor breaks or fails, it must be replaced.

Remington Rivetless Extractors
Remington Rivetless Extractors

Remington introduced their rivetless extractor prior to 1981, with the Varmint rifles chambered in 7mm-08 caliber. It has since been used on all centerfire rifles including their pump and autoloading models, replacing the riveted extractor used on the models 740, 742, 760, 700, 600 and XP-100.

How To Build Your Own Remington 700 - Part I
How To Build Your Own Remington 700 - Part I

Building your own custom rifle has always seemed too far beyond the skills of the average Joe. But with a lot of patience, a little skill and some guidance from Brownells you'll learn how to build a custom Remington 700.

How To Build Your Own Remington 700 - Part II
How To Build Your Own Remington 700 - Part II

Last month we built our own Remington 700 from parts and tools all available here at Brownells. It was a lot easier to complete than I had anticipated.

How To Build Your Own Remington 700 - Part III
How To Build Your Own Remington 700 - Part III

Last month we did some shooting, bedded the action into the stock and did some more shooting. This month, we’ll start out with a trigger adjustment, shoot a bit more, then explain what we’re going to do next and introduce the Dave Manson tooling we’ll use to fully accurize the action.